The importance of a jack stands need not be explained, especially to car owners. Even those who have just required cars for themselves will know just how pivotal it is to have one in the boot of your car or in the garage. Knowing what they do isn’t enough, however, when it comes to making a decision to buy a jack stand. This also involves knowing the quality of what is being offered in relation to the job and vehicle being handled. The list of the best jack stands below compresses this two-step process by indicating which are the best and why.
Related Read: Best Motorcycle Jacks
The Best Jack Stands For Car Safety
[table id=93 /]
1. Torin T42002 2 Ton Jack Stands
Torin T42002 2 Ton Jack Stands
Sold in pairs, these jack stands are made of durable high-grade steel, as testified to by the AMSE PALD standard approval, which is a pretty decent place to start impressing prospective buyers. They can hold vehicles that weight up to 2 tons each, so when put together, a total of 4 tons is easily handled, which is all the more impressive when you consider how relatively small and easy to handle they are. They have a support range of 10-13/16 inches all the way to 16-1/2 inches.
The iron ratchet bar included helps users make precise adjustments to what height they desire. For what can turn out to be a delicate operation, extra safety measurements do not go amiss, and this is provided in the locking rack that adds stability to the piece. The welded frame design also goes a long way in adding durability to the piece and offering the necessary resistance.
Pros:
- Large 4-ton carrying capacity
- Strong and durable
- Saddle surface for better contact
Cons:
- Size may undermine carrying capacity
Summary
For a set of two, these jack stands are able to hold a decent weight, all while holding their own. Their sturdy look is matched by a steady performance, and with extra features such as the ability to adjust heights at precise measurements, they also make sure to take the load off manual work and skill traditionally needed from users. Even what may seem to be its negative point turns out to be a positive the compact size of these two pieces makes them easy to handle.
2. Camco 44561 Olympian Aluminum Stack Jack Stand
Camco 44561 Olympian Aluminum Stack Jack Stand
Made from aluminum, one is already assured that the Camco Stack Jack is sturdy, but the material it is made from tells nothing of how much weight it can support. Using its simple design, users can easily lift automobiles weighing as much as 6000 pounds, and that’s only the amount one of the jacks can support. When the pair as used at the same time, twice the amount of weight can be effortlessly lifted off the ground, reaching heights of up to 17 inches from the prior 11 inches the entire piece measures.
The mechanism involved also means that one can easily adjust the height to anything between those two measurements. The cast aluminum means that the piece is protected from rust and other factors that could deteriorate the jack’s structure.
Pros:
- Compact and lightweight
- Easy to use
- Durable
- Affordable
Cons:
- Short length
Summary
For beginners or those looking for a quick, hassle-free lift, this is definitely one of the best options available. The pair of jack stands are already made with strong material, but despite that, they manage an unexpected amount of weight that perhaps allows them some harsher criticism, since they border on a league that really shouldn’t be their own. If anything, this shows just how much effort was put into the manufacturing of a tool that does all it can to reduce the effort users will have to apply.
3. Milestone Tools Powerzone Jack Stand
Milestone Tools Powerzone Jack Stand
Despite what you would normally get from jack stands of this size, these two jacks stand tall at a default height of 15 inches, and depending on user’s preferences, they can go up to 23.5 inches. This extendibility means that the jack stands are suitable for a wide range of vehicles and ideal for performing a number of jobs.
The versatility would be incomplete without a decent weight carrying capacity, and with each piece able to hold up to 6 tons, it is safe to say that these are capable of carrying just about any car when their forces are combined. The ratchet-style bars allow users to lock on a different height according to what is most convenient to them in as a secure way as possible.
Pros:
- Great length
- Easy to use
- Secure lock mechanisms
Cons:
- Stable feet would prove useful
Summary
The extent to which these jacks inspire confidence is really their only downside; with their sturdy structure, impressive weight lift, and adjustable length, users are often tempted to push the limits as there seem to be no boundaries. There are a few limits, such as when it comes to stability, which is the only reason this list of 7 can’t easily be narrowed down to one. If it were, there is no doubt this would be it.
4. ESCO 10498 Jack Stand
ESCO 10498 Jack Stand
Perhaps best suited for jobs such as changing car tires, the ESCO jack stand is a simple solution for simple problems, and the fact is that such problems are what is most likely to arise. With a capacity to lift a maximum of 3 tons, which is a humble weight lift capacity, these are also more particularly suitable for family vehicles, such as sedans. Once its capacities are established, users will find that the jack stand is not only highly rigid and stable, but it is also fairly easy to use, making it ideal for the quick lift.
Standing 13 inches tall, the jack stand’s height can be extended to 21 inches in height, which is a decent number to reach all things considered. There are four holes that allow this height to be locked into four different heights between the provided range. To ensure stability, rubber feet are fitted at the bottom of each piece, providing the grip needed when in use.
Pros:
- Stable and secure
- Strong quality and durable
- Easy to use
Cons:
- Limited use
Summary
As long as you know what you are getting with this jack stand, satisfaction is almost guaranteed, and for those with experience not using the best, it may even pack a few surprises in how efficient it is at its job. The quality is unquestionable and bound to last a long time, no matter how many times it is used, making it well worth the buy and definitely something to have in the trunk of the car for whenever it is needed.
5. OTC (5372) Stinger 3 Ton Jack Stands
OTC (5372) Stinger 3 Ton Jack Stands
Made of steel, the durability of this pair of jack stands is already somewhat guaranteed, but the manufacturing company, OTC, takes extra steps to ensure this by adding an enamel finish that offers resistance against corrosion, and in so doing, also adds to piece’s overall durability. Each of the stands is able to carry a maximum of 3 tons, which means the pair together could lift a decent 6 Tons.
Apart from the aforementioned assurances provided by the quality of the make, these stands are also ANSI PALD approved, meeting the acceptable load rate standard. Allowing for the stand’s main function is the ability to extend beyond the 12 inches it initially measures all the way up to 17 inches, and with a self-locking ratchet handle that does not give in under heavy loads, one is assured of safety while doing what they need to do.
Pros:
- Ultra durability
- Welded footpads
- Secure self-locking mechanism
Cons:
- Low lift
Summary
These could do with a little more extendibility when it comes to height, but other than that, they work like a charm. With a lifespan that will cover many a year, no matter the conditions, and with the assurances provided by the stability and safety measurements featured in the stands, there is no questioning the functionality of a pair of tools that any car owner will appreciate having around.
6. Hein-Werner HW93503 Blue/Yellow Jack Stand
Hein-Werner HW93503 Blue/Yellow Jack Stand
This colorful and miniature looking jack stand may look like a bit of a toy, but once you go through all that it has to offer, it soon becomes clear that it is nothing to play with. The two-colored piece compromises of the base, painted in blue, and a yellow ratchet piece. The latter is able to extend the stand’s height to 12 inches.
This is done in such a way that the ratchet action can safely stop at intervals, wherever there is a tooth to lock on to, depending on how high a user wants it to go. The stand itself is able to lift a maximum weight of 3 tons, and since the package includes two stands, a total of 6 tons can be lifted from using the pair. The blue part of the stand is a single piece with four legs that is ideal for ensuring stability and durability.
Pros:
- Great weld quality for a blue piece
- Compact and easy to use
- Decent lift capacity
Cons:
- Low height
Summary
Two of these jack stands can do the job of lifting an average car well enough for a number of different jobs, and two sets of the pair only multiply this, though the need for that is rare. For the more practical and immediate needs of the average driver, this will do the job better than any other. Despite the rather deceiving looks, the utmost professionalism clearly went into the assembly of this product, and users should rest assured that they have opted for a safe buy.
7. Arcan Aluminum Jack Stands
Arcan Aluminum Jack Stands
The blinding exterior look of these two jack stands is not only caused by the superior quality aluminum make, but it also justified by that very material, as the very aspect of this product that attracts attention turns out to be its attractive feature overall – strength. The rigid structure is able to support a load of up to 3 tons without giving in to the weight or affecting the piece’s lifespan. This is all the more impressive when you consider the actual weight of each stand, only 10.6 pounds, which makes it portable and easy to use as it is dependable.
As a last measure in the design and make to cement this as one of the sturdiest jack stands available, the A-frame helps with the stability and strength. The height can be adjusted to reach a maximum length of 16.5 inches, made easy by the ratcheting arm that allows for height adjustments, starting off from its 11.5 minimum height.
Pros:
- Extra strong
- Extremely durable
- Lightweight
Cons:
- Low lift limit
Summary
After a thorough review, it comes as no surprise that this jack stand meets the AMSE PALD standards, something expected from a product of its quality. Without neglecting all the other features one expects from a jack stands, this particular make seems to focus solely on brute strength, and that oftentimes is all that is needed.
Conclusion
As can be confirmed by briefly going through the list, there’s something here for everyone, no matter the make of your car or the intentions you have with the jack stands. These have a particular focus on more convenient options that get the job done, as having something large and heavy is just a hindrance most of the time, giving more work to the user than is necessary.
Feel free to take your pick, having been properly informed of what is a good jack stand and what isn’t, and as an unfortunate guarantee to all car owners, you will soon realize why having the best of them available when you need it is something to be appreciative of.
