Skip to Content

How to Reset Ford F150 Oil Change?

If you’ve ever noticed the change engine oil soon light on your Ford F150, you probably want to know how to reset it. This important maintenance reminder system is built into your vehicle and will alert you when it’s time to change your oil. By following these simple steps, you can reset your oil change indicator and avoid costly engine repairs later on. First, find the button on the dashboard that is labeled “Oil Change.” Press it for about 4 to 6 seconds. Alternatively, you can simply press it for a few seconds to enter the menu. In either case, you can reset the oil life and make sure it shows 100%. This simple process can be done three ways:

If the message says “Oil Change Required” on your dashboard, first you need to find your vehicle’s oil life indicator. Look for a button that says “Trip” or “RESET” on your steering wheel. Press the button and hold it for about two seconds. When you see the oil life indicator, you can easily reset it by pressing the “OK” button for 3 seconds. Then you’re ready to change your oil.

How Do I Reset My Ford Oil Change?

How to reset Ford F150 oil change reminder light? First, you need to go into your vehicle’s instrument panel. Locate the oil life reset menu. Press OK to open it. Hold the button for five seconds. After the reset is complete, the oil life reminder light should go out. You can repeat the process if necessary. If the oil life reset message keeps coming up, you can also change the setting to stop it from coming on automatically.

Secondly, you should know how to reset the oil life light on your Ford truck. The oil life light indicates that it is time to change your oil. You can reset the oil light on the vehicle by pressing and holding the “OK” button for 3 seconds. Then, the oil life indicator will go back to 100%. You can continue using the engine and navigating the system by following the same process as above. If you want to make sure that the oil life light stays on, you can perform a factory reset of the oil life reminder on your Ford truck.

Where is the Reset Button on a 2014 Ford F150?

Resetting your fuel gauge is easy but you must be able to locate the button on your Ford F150. The fuel gauge is located on the top of the fuel tank and works on electric energy. Some models feature digital-analog displays while others use liquid crystal to display the information. Regardless of how you do it, you need to be patient and know the exact strength required. Then, simply push the button until the indicator reads one. You will also need to hold down the odometer button and then release it. Observe the fuel level on the gauge after performing the above mentioned modifications.

READ ALSO:  How to Change Windshield Wipers Ford F150?

You may also need to reset your oil change light on your Ford F150. The oil change light indicates that it is time to change your oil and replace the oil filter. If you have completed the service, you must press the reset button in order to clear the oil life warning. Once you’ve done this, you can continue to use your Ford F150 as normal. If you’re unsure about where to locate the reset button, follow these steps:

How Do You Reset Mileage After Oil Change?

Your Ford F150 may have an oil life indicator. In order to reset it, you should turn your ignition on and press the accelerator pedal three times. The light should disappear after ten seconds. Press the right or up arrow to turn the light back on, and then start the engine. The oil life indicator should now display 100%. Your Ford F150 is now ready to go. But, if it still does not show, you should contact your Ford dealership or a body shop.

If you have a 2009 F-150, first, you must go into the setup menu. From here, select Advanced Settings. Scroll down to the Oil Life Reset section. Click OK. This will automatically reset the odometer to its current value. In addition, you can check the oil life of your vehicle by referring to your owner’s manual. Then, follow the steps below to reset your Ford F150’s oil life indicator.

Why is My Change Oil Light on After Oil Change?

If your engine is displaying the oil life indicator after you change your Ford F150’s motor oil, you need to know what it means. This indicator is a part of the oil pump and indicates when to change the oil. The oil in your engine is exposed to dust and dirt while you drive. These particles can clog the oil pump and result in engine problems. Make sure to change your oil regularly, as this will prolong its life. Your engine’s dashboard will display the remaining oil life, and you should do a change at that time.

READ ALSO:  How to Replace a Power Window Motor Ford F150?

Your car’s dashboard has many indicators that indicate something is wrong, including the oil pressure light. The oil pressure light in your Ford F150 illuminates to remind you to change your oil because of a low level of oil pressure or leaking oil. You can reset this light in your Ford F150 by pressing the button on the steering wheel. After pressing the button, scroll down until you find the oil life reset button. Hold it for three seconds to turn the oil life reset button. Then, the light will go off and you can proceed to driving again.

How Do I Reset My 2018 F150?

There are two ways to reset the oil change reminder on a Ford F150. First, press the START button and then select “Engine information.” Then, hold the OK button down for five seconds. The oil change reminder should turn off after the oil reset has completed. If the light does not turn off, you should try to change the oil. After the oil reset is complete, you can check the oil life of your Ford F150 by resetting the oil level.

You can also reset the oil change reminder by pressing the trip button. This button turns on the ignition without starting the car. Holding the trip button down for four to six seconds will bring up a menu. From there, you should press the “OK” button again until the oil life is 100 percent. Repeat this process to reset the oil life reminder for your Ford F150. If you have the same issue, try the same steps in the other vehicle.

How Do You Change the Oil on a 2021 Ford F150?

You might be wondering how to reset the oil on a 2021 model Ford F150. To do this, you must know the specific procedures for each model. Following these instructions will allow you to care for your car more effectively. The first step in this process is to access the dashboard. Press the arrow button on the left side of the steering wheel and scroll to the main menu. Select the Display Mode option. Scroll down and select the Engine Information option. Press and hold the Okay button for about three seconds. Then, the oil life will be reset.

READ ALSO:  How Much Antifreeze Does a Ford F150 Hold?

The next step is to turn on the vehicle. The ignition switch should be turned on. Next, press the START button. Next, select MENU or SETTINGS from the steering wheel. Press the arrow on the right to activate the display mode. Now, you can reset the oil life indicator by selecting a percentage. Once the oil life indicator is reset, you can perform other maintenance tasks as needed.

How Do You Check the Oil Life on a Ford F150?

First, you need to start your truck. To do so, click on the START icon and hold it for a couple of seconds. Then, press the MENU or SETTINGS button on your steering wheel. You can also find this option by pressing the right arrow. After completing the reset, all of the bars will fill up in the option. You should then select a percentage.

To check your oil life, go to the settings screen in the dashboard. There, you will find three settings that can help you. You can also reset the oil life with the advanced settings menu. After completing the steps, you should see a 100% oil life reading. If this number is below the recommended oil life, then the car needs new oil. If you do not want to change the oil, you can also use the reset button to turn the oil life back to 100 percent.

Next, press the SELECT/RESET stem to change the oil life start value. The default value is 70%, but you can decrease it to 10% by pressing the SELECT/RESET stem. The result is a percentage of the oil life remaining, indicating whether you should change the oil now or wait until the next time you change the oil. You can also reset the oil life light if you notice that it is blinking. Alternatively, if you notice that the oil light is blinking, it could mean the oil pressure sensor is malfunctioning.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History