Bypassing a weigh station is a legal option for commercial trucks. Drivewyze has developed a technology called PreClear that allows drivers to bypass weigh stations on a regular basis. The preclearing platform integrates seamlessly with a driver’s electronic logging device or in-cab telematics display. This allows drivers to access weigh station bypass on a familiar device. Bypassing a weigh station can reduce operational costs and increase fleet safety.
The first step to bypassing a weigh station is to check your eligibility. You can only get PrePass if you’re an owner-operator or company that meets certain eligibility requirements. PrePass uses an in-cab transponder to electronically identify your truck. The computer will verify your credentials and then send a green light or audible signal when you’re authorized. The truck’s transponder will emit an audible signal that the weigh station can recognize.
Bypassing weigh stations will give you extra drive time and increase productivity. According to U.S. Department of Transportation studies, the average time spent in a weigh station is nearly five minutes. It costs approximately $8.68 per minute to stop at a weigh station. Bypassing weigh stations can save a trucking fleet valuable time and fuel. A fleet of 1500 trucks can save over two thousand gallons of fuel per month in just a single month by bypassing weigh stations.
Why Do Some Trucks Get to Bypass Weigh Stations?
Some truck drivers may be wondering why some of their vehicles are bypassing weigh stations. They do so to avoid the large fines associated with a level 1 inspection or a law enforcement pullover. But the short time spent at weigh stations is often more valuable than the large fines. Read on to learn more about why some trucks bypass weigh stations. This article will provide you with information you need to avoid being a skipper.
One way to avoid paying to bypass weigh stations is to have a truck that has the RFID or PrePass transponder in its cab. Bypass trucks use RFID communication to identify themselves, which can be detected by scales. But the trucker must also be prepared to stop in case the scales don’t receive the green light. In this way, the driver can avoid the hassle of waiting in long lines.
How Do Trucks Bypass Weigh Stations?
Bypass weigh stations with a truck scale bypass system. Bypassing weigh stations with this system saves time for drivers and fuel for fleets. Most weigh station bypass systems have monthly reports that show which weigh stations are bypassed and how much money they save. Trucks can bypass up to two weigh stations per day. Bypassing a weigh station can save truck drivers hundreds or even thousands of dollars per month. Bypass programs work by allowing trucks to avoid weigh stations with a high risk.
Using secure mobile technology, bypass software records the time and date a truck pulls into a weigh station. The software never leaves the weigh station, and the data collected is never shared with other weigh stations or between drivers. Bypass systems also ensure that law enforcement personnel only see weigh stations within their jurisdiction and cannot use location data to issue citations. As a result, trucks can bypass weigh stations without incurring a fine.
What is the Point of Truck Weigh Stations?
If you are a professional truck driver, you have no doubt had to stop at a weigh station at one time or another. These weigh stations are monitored by the Department of Transportation and the Department of Motor Vehicles and their main goal is to ensure the safety of truck drivers and other road users. Understanding weigh station rules can help you avoid major inconveniences, such as not getting through the station in time. Read on to learn more about the importance of these stops.
Truck weigh stations are checkpoints across the country for ensuring that trucks are not overloaded. They may weigh each axle individually, or the entire vehicle. Some weigh stations have rolling scales, so the truck can keep moving while being weighed. Overloaded trucks may be held at the weigh station until another truck picks up the excess. In addition, truck weigh stations are used to ensure that drivers are following weight regulations.
How Many Weigh Stations are in the US?
Currently, there are approximately 680 weigh stations in the US. Driving through a weigh station is similar to driving a semi-truck or a Chevy Colorado truck. It can be slow going, and officers are looking for compliance and safety. Each weigh station is unique, and officers go about their inspections in different ways. While there’s nothing wrong with slowing down a bit when processing through a weigh station, drivers don’t necessarily want to spend more time there.
Firstly, weigh stations are crucial for the safety and efficiency of commercial vehicles. Trucks, semi-trucks, rental vans with trailers, and other commercial vehicles must stop and weigh their load at a weigh station. This allows the government and other entities to check for safety and compliance with the U.S. Department of Transportation (USDOT) regulations. Aside from these safety issues, weigh stations also allow commercial drivers to collect taxes based on weight.
How Do Truck Weigh Scales Work?
A simple explanation of how truck weigh scales work is to look at the load cell system. A load cell is composed of material that contains a strain gauge, usually an electrical wire. The gauge measures the amount of stress that is applied to the material when it is subjected to varying pressures, and the weight of a truck is based on the difference between the strain gauge readings. Modern devices use multiple load cells and totalize the inputs from sensor boxes. The final weight reading is then reported to a nearby office or hut. Today, many weighbridges are also connected to a PC that runs truck scale software.
There are two types of truck weigh scales. One-axle scales require a truck driver to crawl over one scale, while one-stop arrays strategically position several scales in front of a truck and require a single driver to position their truck only once. Weigh-in-motion scales are the most popular, as they allow the truck to drive over an array of sensors and calculate the total weight.
How Do You Avoid Weigh Stations?
Truckers are asked all the time: how do you avoid weigh stations? Well, the short answer is to be polite and follow the rules. If you are belligerent and rude, you will not speed through the weigh station, and you will just make everyone’s life miserable. To avoid these annoyances, follow the following tips:
First, plan ahead. Whenever you are driving, look for signs that say “weigh station ahead.” These signs will tell you where the weigh station is and whether or not it is open. If the weigh station is closed, you don’t need to stop. However, if the weigh station is open, the signs will tell you how fast you should drive. Be sure to obey the speed limit! Remember that this is the law!
Second, keep your vehicle in good condition. While weigh stations are a hassle, they serve a necessary purpose. They prevent overloaded trucks from causing major damage to the road and highways. When trucks overweight, the result is more road maintenance, delays, and accidents. Always follow signage and make sure all your freight documents are in the truck. By following these tips, you can avoid weigh stations. This will make your trucking journey much easier.
