Skip to Content

How to Reset Oil Light on 2010 Ford F150?

The 2010 Ford F150 has a maintenance required oil light that you will need to reset after every five thousand miles. Although this light does not indicate any danger, it is simply a reminder that you need to change your oil. Luckily, there are many quick LUB stores that will reset the light for you. Here are a few ways to reset the oil light in your car:

First, turn off the ignition. To do this, go to the MENU section of your vehicle and press the arrow buttons on your steering wheel. Once you are there, press the OK button and hold it for five seconds. Once you see the message “reset oil life”, you can press the OK button. Your car will then start. Once you have reset the oil life light, you should see the light disappear.

If the message center does not work, you can also manually reset your oil life by pressing the trip button. If you don’t have a message center, press the down arrow key. Press the “reset” button for two seconds and the oil life will reset to 100%. Now, your Ford F150 will have an oil life indicator again. The message center isn’t very convenient for this, so you can do it manually without using the message center.

How Do You Change the Oil on a 2010 Ford F150?

If you have ever wondered how to change the oil in your Ford F-150, you’re not alone. Most owners are irritated by the annoying oil change light that comes on when the engine is warm. It’s far easier to switch it off than to perform the necessary work. To keep your car running smoothly, you’ll need to change the oil every 5,000 to ten thousand miles.

To reset the oil life indicator light, turn off your engine and park it somewhere safe. Press the select/reset stem button located on the steering wheel and hold it for two seconds. The oil light should return to the green color and indicate that you need to change the oil. You can then check for leaks or make sure you don’t have any more oil than it can hold. To change the oil, you should fill your tank to three quarters.

READ ALSO:  How Much is a 1977 Ford F150 Worth?

The recommended oil for your 2010 Ford F150 is SAE 5W-20. Ford recommends this oil for all engines to increase fuel efficiency and performance durability. It comes in six or seven quart containers for 4.6-liter engines and 5.4-liter for the larger engines. A full oil change includes inspecting other filters and topping off important fluids, as well as a free vehicle inspection. It doesn’t get easier than this!

How Do I Reset My Ford Oil Change?

If you’re concerned that the oil light on your 2010 Ford F150 has come on, the first step is to find the setting for your vehicle’s oil life. Some vehicles will have a button to start the engine, while others will have no such option. If you’re not sure which setting to use, the easiest way to reset the oil life light is to push the reset button on your dashboard. Press the option until all bars are filled to 100%.

On some cars, the oil life indicator may be reset by pressing the trip button, which turns on the ignition key without starting the engine. Then, press the button for 4 to 6 seconds. Wait until the percentage on the oil life indicator is completely displayed. To reset oil life indicator, make sure to change oil after every 5000 miles or every 3,000 miles. If this is the case for your 2010 Ford F150, you can reset the light by following the instructions in your owner’s manual.

How Do You Check the Oil Life on a Ford F150?

First, you will need to find the reset controls for your vehicle’s oil life monitor. This control is usually located on the left of the steering wheel. Press the up or down buttons to access the settings. You may also be able to find the reset button above your vehicle. Turn the ignition off and back on to test whether the oil life monitor is functioning properly. If the oil life monitor is showing you an incorrect number, consult your vehicle’s owner’s manual to determine the proper procedure to change the oil.

You can also check the oil life by looking at the oil level gauge. The engine oil level indicator on a Ford F150 is a great way to check the life of your oil. Once you’ve done that, just fill up the engine with oil and drive it as usual. Otherwise, it’s best to take your car to a mechanic and get it checked. If you have a Ford F150, it may be worth the investment to have a mechanic check the oil level.

READ ALSO:  What Oil For Ford F150?

What Does the Wrench Mean on a 2010 F150?

If you’re wondering, “What Does the Wrench Mean on a 2010, Ford F150?” you’ve come to the right place. This warning light is one of the many malfunctions on the ford dashboard. While these warning lights are not as serious as a check engine light, they can be frustrating to encounter. If you can, schedule an appointment with a mechanic as soon as you notice a light on your dashboard. Even if you’re not an expert mechanic, you can use a few tricks to reset these error codes and get back on the road.

First, use a diagnostic scan tool to determine what codes your truck has. If you can’t figure out what the codes mean, visit a mechanic’s shop and have them run a diagnostic test on your car. You can also use an OBD2 Scan Tool to determine which codes are present in your vehicle. Regardless of whether your truck has a wrench light or not, if you see one, it’s important to fix the issue as quickly as possible.

How Many Quarts of Oil Does My 2010 F150 Take?

To learn how much oil your 2010 Ford F150 needs, check the owner’s manual. Your vehicle’s oil capacity depends on the type of engine you have. EcoBoost V6s take 2.7 quarts of oil, while 5.0L V8s require 8.8 quarts. A good rule of thumb is to use the smallest displacement engine for the most savings.

The engine that powers your 2010 Ford F150 uses a 5W-20 synthetic blend oil. Ford recommends using this motor oil for all engines, including diesels, because it improves fuel economy. The recommended oil for 4.6L and 5.4L engines is Ford Motorcraft SAE 5W-20 Premium Synthetic Blend. A few other factors are important, as well, such as the car’s engine size and viscosity.

The oil capacity in your 2010 Ford F150 is six quarts. The larger 5.4L V8 engine needs seven quarts. Regular maintenance will help your Ford F150 earn good mileage. To learn more about your vehicle’s oil capacity, check your vehicle owner’s manual. The owner’s manual may also give you a better idea of how much oil your 2010 Ford F150 can take.

READ ALSO:  How to Program Garage Door Opener to Ford F150?

Where is the Oil Filter on a 2010 Ford F 150?

The Ford F-150 requires the use of 5W-20 synthetic motor oil. This oil is formulated to maintain lubrication and to help drive down engine block temperatures. A cooler engine is more efficient, so changing the oil is a vital part of maintenance. If you have any questions, consult the owner’s manual or call a trusted mechanic. Fortunately, it’s easy to replace the oil filter on a 2010 Ford F-150.

The oil filter is located in the engine bay. To remove the filter, crawl underneath the car and then reach upwards. Use an oil filter wrench to remove it. It should come off easily. You can recycle the filter’s plastic bag. It is usually acceptable to recycle it after removing the filter. After you’ve removed it, make sure to replace the cap. The oil filter is located on the driver side of the engine block.

How Do You Check the Oil on a 2011 Ford F150?

To properly care for your 2011 Ford F150, you must know how to check the oil. There are a few things to remember before you begin this task. A 6.2L V8 engine needs about seven quarts of oil to operate properly. To make sure you buy the right amount of oil when changing your oil, you should check the oil level with a dipstick. A vehicle history check can reveal any hidden issues with the vehicle, such as accidents or branded titles.

The location of the oil dipstick will depend on the engine type in your vehicle. The 3.7, 5.0, and 6.2 L engines require SAE 5W-20 engine oil. The 3.5L EcoBoost uses 5W-30 oil. The owner’s manual will list the type of oil for your specific model. In general, use SAE 5W-20 oil in your Ford F150. To maximize fuel economy, use a motorcraft brand oil.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History