If you’ve had trouble getting the oil change reminder to go away, the good news is that you can easily reset this indicator. The process is simple and only takes a few minutes, and it will reset the oil change light in your 2018 Ford F150 to its 100% value. The process involves sitting in the driver’s seat, selecting “engine information,” and pressing the OK button. Hold down the OK button for five seconds. Once the oil change reminder has been cleared, the light will go out.
If the Check Engine Light keeps flashing, you may be experiencing a different problem. If this occurs, make sure that the gas cap is secure. If it is, try adjusting the gas cap. If this doesn’t fix the problem, you may want to check the catalytic converter. Stop-and-go driving can also cause this problem. After twenty or forty miles, the check engine light should turn off.
Related Questions / Contents
How Do I Reset My 2018 F150?
The oil change light in your 2018 Ford F150 indicates that your engine oil needs to be changed. Once you change the oil, you will need to reset the light to the normal 100 percent. There are a few different ways to do this, but here are a few of the most common ways. The first method is to simply drive the truck for several miles, until the warning light stops blinking. This process may take several tries before it is successful.
The second method to reset the oil life indicator in your 2018 Ford F150 is to access the dashboard and push the SETUP button. You should see a menu. Select the maintenance option. Press the okay button and hold for 3 seconds. After that, the oil life indicator will flash again. You can then restart your vehicle. Once the oil life indicator is back on, it’s time to perform the next step.
How Do I Reset My Ford Oil Change?
If you notice that your car’s oil change light is on, you can quickly reset it. To do this, you need to go into your vehicle’s settings menu. The settings menu has 3 different types of screens. You can reset the oil life, advance settings, and more. Below, you’ll find how to reset the oil life on your Ford F150. If you have questions, let us help!
First, find the MENU or settings menu on your truck’s dashboard. Hold the button for 3-4 seconds and then press the right arrow. Press the arrow buttons to scroll down through the different modes. You can choose ENGINE INFORMATION or TRUCK INFORMATION from the list. You can also go to the ENGINE INFORMATION menu and select the oil change light. After you’ve finished your settings, you can turn your truck back on and begin the process over.
If you’re not sure how to reset the oil change light on your 2018 Ford F150, here are some steps to try:
How Does F150 Calculate Oil Life?
How Does Ford F150 calculate oil life? is a question you may be asking yourself. Ford’s intelligent oil life monitor uses a variety of factors, including actual engine conditions and driving habits, to determine the oil life of your vehicle. When the indicator reaches 0%, the computer will send you an automatic reminder that your vehicle needs an oil change. If you wait until the indicator reaches that point, you may be causing serious damage to your engine.
You can also manually reset the oil life display on a 2022 F-150. Simply open the settings menu and select Advanced Settings. From there, select Vehicle Oil Life Reset. Press OK to confirm. The oil life display should reset to 100%. You can repeat the process for any other model. Remember to follow the manufacturer’s recommended oil life intervals and change your oil regularly to ensure a long, reliable vehicle.
How Often Should Oil Be Changed on 2018 F150?
If you want to know how to reset oil change light on your 2018 Ford F150, read this article. Oil change is very important and your truck will need it frequently. It is recommended to change the oil at least every five thousand miles or six months. It’s also important to make sure that you don’t go more than ten thousand miles since your last oil change. After a few thousand miles, you’ll notice an orange oil change light on your dashboard. If you’ve reached this point, don’t worry, there are easy fixes available.
If the oil change light stays on for more than five minutes, the car’s engine has a problem. This is not always an emergency, and the vehicle is still safe to drive. You can try the following tips to reset the oil change light on your 2018 Ford F150. First, check the gas cap. The gas cap can be found on the roof or on the fuel pump. If it’s tight, you can turn off the check engine light.
Is the Ford Oil Life Indicator Accurate?
The Ford Oil Life Indicator (IOLM) is a meter that shows the percentage of remaining oil life. It also indicates the next recommended oil change and provides automatic updates about the health of your vehicle. You can also set the reminders to be triggered around 15%, eighty percent, or any other number you wish. The Ford Oil Life Indicator is highly intuitive and easy to use, but the car manufacturer recommends changing the oil at least once a year, to prevent engine damage.
The oil life indicator is based on a mathematical algorithm that uses engine revolutions, temperature, driving time, and other factors to determine when oil should be changed. This information is then sent to the car’s powertrain control module, or PCM, which is the main on-board computer. The engineers have developed a system that uses these data to reliably calculate remaining oil life. But is the Ford Oil Life Indicator Accurate?
Does 2018 F150 Require Synthetic Oil?
When you’re ready to change your oil, you’ll want to consider which type of oil you should use in your new 2018 Ford F-150. The 2.7L EcoBoost engine needs 6.0 quarts of SAE 5W-30 oil, the 3.5L V6 needs 6.4 quarts of SEA 5W-20 oil, and the 5.0L V8 requires 8.8 quarts of synthetic oil. If you’re interested in using a synthetic oil in your 2018 F-150, you should follow the same recommendation.
The oil in your 2018 Ford F-150 helps keep your engine clean and prevents it from knocking. It also helps prevent parts of the engine from contacting each other. Oil also collects dirt and debris and carries it to the oil filter, where it is trapped by the filter. The result is cleaner motor oil, and fewer chances of dirt and debris building up in the engine. If you don’t change the oil, you could cause major mechanical problems.
For your 2019 Ford F-150, it’s best to use 5W-20 oil. The API certification seal on your oil ensures its quality. It means that it doesn’t contain any additives, which could be detrimental to your engine’s performance. While the manual doesn’t specify which type of oil is right for your truck, the Motorcraft oil is an excellent choice. Motorcraft oil is API-certified and won’t add any unnecessary additives to your engine.
How Do You Reset Mileage After Oil Change?
If you have recently changed the oil in your 2018 Ford F150, you may be wondering how to reset the mileage. There are several ways you can do this. You can also reset the oil change minder on your vehicle. Follow these instructions. First, turn on the ignition key without turning it off. Then, press and hold the trip button for four to six seconds. You should see 100% as the oil life.
In some models, you can go as long as a year without changing the oil. However, the frequency of oil changes depends on driving conditions and the weight of the load. Your mechanic will recommend a shorter interval if you live in a harsh climate or drive on dusty roads. Then, you’ll know when your next oil change is needed. By following these steps, your truck will remain in top shape for many years.
On your display screen, you’ll see three icons: MENU, SETTINGS, and ENGINE INFORMATION. Press the arrow buttons to scroll through the display modes. Press the ENGINE INFORMATION button. Press the right arrow to select TRUCK INFORMATION. You’ll see a list of items you need to change. If you don’t need to change any settings, you can simply reset the mileage in your truck by following these steps.
Learn More Here:
4.) F150 History