Skip to Content

How to Reset Oil Change Light on 2009 Ford F150?

The “reset oil life” and “reset oil change” messages on your Ford F150 mean your vehicle’s engine needs a change of oil. After performing the oil change, you’ll need to reset the oil life light. Here are three methods to reset the oil change light on your 2009 Ford F150. Using the key in the ignition, press and hold the trip button for four to six seconds. Press the reset button for at least one minute until the oil life light on the instrument panel turns solid green.

If the “oil life” light remains on, you can reset it yourself. The process usually takes four to five minutes. To reset it, you need to push the button on your dashboard until the oil life indicator reaches 100%. Alternatively, you may find the light blinking, indicating that your vehicle’s oil pressure sensor is malfunctioning. This sensor detects when the oil pressure drops and triggers the dashboard light.

How Do You Change the Oil on a 2009 Ford F150?

If your vehicle’s oil life meter is flashing “oil change due” or “oil change required” messages, it is time to make an oil-change appointment. After the oil change, you must reset the oil-life light to “on.” You can use three methods to reset this light. First, turn on the ignition without starting the vehicle. Hold the trip button for four to six seconds to access the setup menu. Press the button again when the oil life reads 100%.

Once you have done this, you can use the arrow keys to navigate to the settings menu. Press the DOWN or UP arrow to navigate to the SETTINGS menu. Press the RIGHT arrow to navigate to the VEHICLE menu. Once there, press the OK button to reset the OIL LIFE indicator. If you do not see any oil life reset buttons, you must select a different one.

How Do I Reset My Ford Oil Change?

If your 2009 Ford F150 has the oil life indicator on, you might want to reset it. There are several ways to do this. You can either press the trip button or start the engine and then press the trip button again to bring up the setup menu. Once you’re in the setup menu, press the oil life reset button for four to six seconds. Your engine should now read 100% oil life. To reset this indicator, follow the steps below:

READ ALSO:  How Much to Hire Food Truck?

In some cars, the oil life reset button is located on the dashboard. To access it, you need to select the vehicle and press the OK button. Hold the OK button for at least 5 seconds. Once the reset is complete, you will see that the oil life indicator light will go out. If this does not work for you, contact your mechanic and see what he or she recommends. It might be the right time to replace the oil.

How Do You Reset Your Oil Change Reminder?

There are several ways to reset the oil life minder and oil change reminder in a 2009 Ford F150. You can reset these settings with the steering wheel controls. Use the arrow buttons on the steering wheel to navigate through the menu. Once you’ve selected the vehicle and engine type, select the SETTINGS menu. Press the OK button for 3 seconds. The oil life minder will turn off and the oil life will appear again when the vehicle needs to be changed.

Once you’ve completed this step, the oil life reminder on your 2009 Ford F150 will be gone. You can start your vehicle and reset the oil life reminder by pressing the corresponding buttons on the instrument panel. You can also use the pad on the screen to select settings. After confirming your choice, press the OK button. Wait for four or five seconds for the oil life reminder to turn off. If the light continues to flashing, it might be the oil pressure sensor.

How Do I Reset My Oil Life?

To find the location where you can reset oil life on your truck, press the SETUP button on the steering wheel. The SETTINGS menu will pop up. Next, press and hold the ENGINE INFORMATION button on the steering wheel for 4 to 6 seconds. The oil life will be reset to 100%. After that, you can press the SETUP button again to access the advanced settings menu. Press and hold the SETTINGS button again for about four to six seconds until the oil life is back to normal.

READ ALSO:  How to Program Garage Door Opener Ford F150?

If the start value of oil life is still a high number, then you need to press and hold the RESET button for two seconds. This will reset the oil life back to its starting value of seven thousand miles (12,200 km), which is equivalent to six months. Then, press and hold the SELECT/RESET stem for another couple of seconds until the desired start value appears. When the value reaches the desired level, the indicator will turn blue.

How Many Quarts of Oil Does a 2009 F150 Take?

How many quarts of oil does your 2009 Ford F150 take? The right amount depends on the engine size and type. The engine of your Ford F150 should be lubricated with SAE 5W-20 oil, whichever is the higher recommended level. Ensure that your oil is of the right type for your engine by checking the manufacturers recommended oil type and capacity tables.

Your truck will need at least six quarts of oil for the 5.4L engine. Depending on the model and engine, the number can be higher or lower. You should check the manual to find out what the recommended quantity is for your model. If your engine is smaller, consider using a smaller displacement oil. Your Ford will still be under warranty even if you fill it up too often.

Your 2009 Ford F150 with a 3.7L engine is capable of holding 6.0 US quarts of oil. However, you should use a different oil brand. It is best to use 5W20 oil in your truck, since dirty oil can damage your engine. You should also never forget to change the oil filter. The Ford FL-500-S oil filter is recommended.

What Oil Does a 2009 Ford F150 Take?

The Ford F-150 has several different engine types, and the best oil for your vehicle depends on the type of engine and the engine size. Generally, the Ford recommends SAE 5W-20 oil for all engine types to improve fuel economy and durability. The 2009 Ford F-150’s oil capacity is 6 or 7 quarts for 4.6 liter and 5.4 liter engines, respectively. Below is a table with recommended oil, as well as the capacity and change period for each engine type.

READ ALSO:  How Much is a Truck Registration in Pa?

The 3.3-liter engine in the 2009 Ford F150 takes around 6.0 US quarts of oil. You should always follow the owner’s manual for recommendations regarding the type of oil to use. The Ford F-150 manual recommends using 5W20 oil, which is equivalent to 5.7 liters. If you’re using other brands, make sure that the oil is approved by Ford and has the correct viscosity grade.

How Many Quarts of Oil Does a Ford F150 Take?

How Many Quarts of Oil Does a 2009 Ford F150 Take? The 2009 F-150’s engine size is 4.6 L. It requires SAE 5W-20 oil. Ford recommends using this type of oil for all engine sizes, because it helps with fuel economy and durability. In addition, this oil contains a higher level of protection for your engine, because it can handle a wider range of temperatures. If you’re worried about the amount of oil your 2009 Ford F150 can handle, consult the manufacturer’s recommended oil type and capacity chart.

The Ford F150 3.3 L engine takes up to 6.0 US quarts of oil. That’s about 5.7 liters. The manual recommends 5W-20 oil. However, if you don’t have an oil filter, you can use any other brand, as long as it meets the API standards and meets Ford’s specifications. Remember to check the owner’s manual to determine how much oil your Ford F150 will take.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History