After you have shot your big whitetail deer, you need to figure out how to get it out of the woods and into your truck. There are a couple of different ways to do this. The most common method involves taking off the deer’s tailgate, which reduces the angle and makes it easier to move the deer into the truck bed. Another option is to tie the head to the bumper or use a jet sled to pull the deer in.
Getting the deer in your truck can be a tricky task, so make sure you use the right tools to make the job as easy as possible. A cargo carrier made specifically for this purpose is a great option. You can also invest in a pulley and boards to help you safely load the deer.
Once you’ve secured the deer in the truck, the next step is to dress it. Be sure that the head and hind legs are tied. Using a rope is a great way to secure the head and hind legs. A game sling is a useful tool for this purpose and can be purchased at a retail outdoor supply store.
How Do You Load a Deer into a Car?
To load a deer into your car, you’ll need a tie-down rope that is approximately five to six feet long. You should place it over the neck and chest of the deer. If you’re carrying a smaller deer, you can use a stock roof rack or rooftop cargo basket to secure the deer.
To secure the deer inside the car, you can use ropes or “S” hooks. Do not use thick straps, as they can dent the car’s body or feed through tiny gaps. Instead, use ropes or nylon paracord. The head of the deer should face the right side of the car to avoid running into oncoming traffic. If possible, back up the car to the right side of the deer to make loading and unloading the animal easier.
To safely load the deer into your car, make sure to dress it properly. Dressing the deer well will prevent blood from dripping onto the car’s window. Also, it will help protect the venison from fly contamination.
How Do You Load a Deer on an ATV?
The first step to loading a deer on an ATV in a truck is to secure the deer. Generally, this requires a long welded-on elbow about a foot long and at least 2.5-3 feet above the ground. Then, you can attach a light-weight atv winch to the bottom of the rear floor board of your truck.
Loading a deer on an ATV is the most difficult part of the entire process. A 180-pound deer can be difficult to handle, especially when it’s cold. A deer’s head can easily flop over as it is being loaded, so you’ll need an extra bungie to hold its head. The antlers can also get caught between the tire and the fender.
When hunting for deer in remote areas, you can also use a backpack. To ensure the meat stays clean, it is important to use a backpack that is sturdy and adjustable to the size of the deer. You’ll also need a large cooler and a tarp to protect the interior of your vehicle while you load a deer. A game cart will also help you move a deer more efficiently. These carts usually cost around $60 to $150.
How Do You Mount a Winch to a Truck Bed?
There are a few things you need to know when installing a winch to your truck bed. First of all, you must make sure that the winch is properly rated to handle the pull you will apply. Your local auto retailer can help you determine what rating your winch needs. Secondly, ensure that the winch mounting plate is perpendicular to the centerline of the vehicle. Then, make sure that the holes in the mounting plate correspond with the holes in the winch base.
Another thing you need to know about winches is the ropes. If you buy a new rope, make sure to respool it and test it before using it. Also, remember to re-wrap the winch cable after using it. This will help prevent the inner layers from becoming damaged or sealing to the drum. Additionally, be careful to protect your hands from the sharp edges of the cable. Wear heavy leather gloves to prevent any injuries and increase your grip on the cable.
Once you have your truck ready, the next step is to load the deer into the bed of the truck. If the terrain is uneven, make sure that you adjust the vehicle accordingly. You should also use a tarp to keep the meat cool and safe.
How Do You Load an Elk?
Loading an elk is difficult and can require specialized equipment. Usually, the elk’s head must be oriented downward so that the internal organs are not compressed against the pelvis. It is also important to leave proof of sex on the animal’s quarters. A bull elk may have one testicle on each rear quarter. The penis may be left on the other side. A cow elk will have half of its udder attached.
First, you need a winch. If you have one, you should mount it on the bed of your truck. You should also secure the winch rope around the animal’s neck. Then, you can load the elk into the truck. If you are using a pickup, you can also place a plywood ramp in the bed. Then, you can slide the elk into the bed by ensuring that the animal’s head touches the horseshoe.
The next step is to prepare the meat. The elk’s chest cavity should be opened to let air circulate, which will help retard spoilage. After you’ve opened the chest cavity, it is best to tie the hind legs to opposite objects. You can also hang the quarters from limbs to protect them from predators.
How Do You Carry a Deer by Yourself?
There are two main methods for carrying a deer in your vehicle: strapping it to the roof of the vehicle or hoisting it into the trunk. In both cases, it’s important to keep your back straight and bend your knees while hoisting the deer. Another option is to use a portable game elevator. However, you’ll need space in your vehicle to fit a game elevator.
When loading a deer, keep your back and knees straight, and grab the legs if possible. If you can’t get a game elevator, use ropes or pulleys to secure the deer. You can also use a cargo carrier. These are inexpensive and very convenient for transporting deer.
Using a game cart is another great option. They can hold up to 150 pounds, and are ideal for dragging deer carcasses. In addition, they keep the weight off the car’s roof, which prevents damage to the vehicle’s roof. To prevent a deer from rolling around on the roof of your truck, you can place a tarp over the deer to protect it from dust and debris. If your vehicle does not have a game cart, you can purchase one for around $60 to $150.
Can You Drag Deer by Antlers?
Deer aren’t exactly easy to drag, especially if they’re large. They’re also not light and aren’t shaped for easy movement. Thankfully, modern ingenuity has come up with ways to make deer easier to move. One such method is the deer drag. The idea is simple, and new models are being created all the time.
First, prepare the deer for transportation. Consider using a tarp or poncho. A tarp can be gray, brown, or camouflage. This way, it will be less likely to be damaged by the deer. You can also use a cart or wheeler to transport the deer.
Another popular method is to use a tree stand harness, which involves fastening leg straps around the deer’s head and shoulders. This type of drag is a low-tech option and works well in rough terrain. The only downside is that it takes a lot of force to move it. It’s more suitable for public-land hunters. A sled, on the other hand, is easier to pull and maneuver. Moreover, it’s more versatile than a cart, and it can be used in rough terrain.
Learn More Here:
3.) Best Trucks
