Skip to Content

How to Measure a Truck Bed For a Cover?

When installing a truck bed cover, knowing how to measure your truck bed is key. Although pickup truck beds can vary in length, the average length is six to seven feet. The length will vary depending on the manufacturer of your truck. It is also important to consider the style of your truck. Some trucks have side steps, while others have extended cabs or 4 door crew cabs.

Taking measurements of a truck bed can be tricky. It is important to include flares and fenders when measuring your truck bed. This will ensure your cover will fit. The length is also an important consideration when purchasing a cover. In addition to measuring the length of the bed, you must also take into account the width and the height of the truck’s fenders and flares.

To properly measure your truck bed, you’ll need a tape measure that measures a minimum of 10 feet. You’ll also need a paper and eraser or a smartphone calculator. Once you’ve measured the width, you’ll need to measure the length from the inside edge of the tailgate to the inner wall of the bed rail. The length measurement will depend on the type of truck bed and size, so be sure to measure both sides to get the exact measurement.

How Do I Know What Size Truck Bed I Have?

To determine the size of your truck bed, use a tape measure from the widest part of the bed. Measure from one side to the other, and from top to bottom. Note that the measurements you get from measuring the width of your truck bed will not match the exterior dimensions of your truck.

Taking accurate measurements of the truck bed is important, as it will allow you to determine the size of the bed for new accessories. It will also help you determine how much cargo your truck can hold. It is important to have a friend to help you measure your truck bed so that you can be sure that you are taking the proper measurements. Also, use the rails and walls of your truck bed to help you keep the measurements straight.

To find the size of your truck bed, you need to measure the length of the bed from the inside bulkhead to the inside edge of the tailgate. Then, divide that length by 27, and you will get the total length of your truck bed. Once you know this measurement, you can choose the right accessories for your truck.

READ ALSO:  What is High Engine Hours For a Truck?

How Do I Know What Size Tonneau Cover I Need?

Getting the right size for your truck is crucial when you buy a tonneau cover. You need to take measurements of your truck bed, including the inside of the rail and liner. By doing this, you will know how big you need your cover to be and how it will fit your truck. In addition, you’ll want to find a cover that is sturdy enough to last for several years.

To determine the size of your tonneau cover, measure the length of the truck bed from the back of the passenger cabin to the tailgate. Round the measurement to an even number. Then, subtract one inch from the length. This is the standard size for tonneau covers.

You’ll need a measuring tape up to 8 feet long to accurately measure your truck bed. Measure from the edge of the truck bed to the bulkhead wall, towards the front of the vehicle. Measurements should be accurate to the millimeter, because if you measure your truck bed incorrectly, it may not fit. Once you have the proper measurements, write down the size in inches on the measuring tape.

How Can I Tell the Length of My Truck Bed by VIN?

In order to find the proper truck bed cover, you should know the exact length of your vehicle. This can be done by using a measuring tape and taking measurements of your truck’s bed from the tailgate to the bulkhead. Then, round the measurement to the nearest half-foot. Once you have your measurements, you can start shopping for truck bed accessories.

The length of your truck bed is measured from the bulkhead along the bed rail and the inside edge of the tailgate. Although many manufacturers round up the measurements, you can still use this information to select the right truck bed accessory. If you do not have a measurement, you can use a measurement table to find out the length of the truck bed.

The length of your truck’s bed is critical for hauling cargo. The VIN number can be found on the label of your vehicle. The label will also tell you the Gross Vehicle Weight Rating, which is the maximum weight your truck can safely carry, including passengers. The manufacturer’s user manual will also list the truck’s weight.

READ ALSO:  How to Make a Truck Bed Cover?

What is a Standard Size Truck Bed?

Truck beds vary in length and volume depending on the make and model. The smaller models have the smallest beds, while the largest trucks have the biggest. The smallest beds are the ones found on the Jeep Gladiator and GMC Sierra. To find the correct size for your truck bed, measure the exterior dimensions of your truck.

A truck bed’s length is measured from the tailgate to the bulkhead. Most manufacturers round their measurements to the nearest half foot. Then, determine how long you need your truck bed to be. Once you know this measurement, you can choose the appropriate accessories. The size table below is meant for reference only.

A standard truck bed size ranges from six feet five inches to seven feet. This size is ideal for most truck buyers. It provides plenty of space but avoids the disadvantages of a long bed. However, if you need to haul unusually long cargo, you’ll need a longer bed. The standard length of a bed on Toyota and Ford trucks is 6.5 feet, while the length of the bed on Chevy trucks is 6.6 feet.

Can You Tell Bed Length by VIN Number?

Before you measure a truck’s bed, it’s important to determine the VIN number. This will help you determine how long the bed is. It’s usually measured from the tailgate to the inside wall of the bulkhead. However, this measurement may not always be exact. This is because most manufacturers round up their measurements to the nearest half-foot. To get an exact measurement, you may need to flatten the item.

If you don’t have the VIN, the best way to find out the bed size of a truck is to find the build sheet. This will tell you whether the bed is standard or a longbed. A standard longbed truck will have a bed length of seven feet.

While the VIN number won’t tell you the exact bed length, it should be enough to give you a rough idea of how long a bed is. It’s important to check the labels on the truck, too, to ensure you’re buying the right size. The label will tell you how much weight the truck can safely haul. You can also check the user manual for the truck and check the maximum weight it can carry.

READ ALSO:  How to Get Your Truck to Regen?

Are All Truck Bed Widths the Same?

If you are looking to buy a truck, you may be wondering Are All Truck Bed Widths the same? Before you do, it is best to find out how long your truck’s bed is by measuring it with a tape measure. Measure the length from the widest part of the bed to the lowest point. If possible, measure it from top to bottom, too. Then, compare that measurement to the advertised length of the bed.

The standard length of a truck bed is seven feet. This means that a short bed is about five feet long, while a long bed is about seven feet long. Typically, a truck bed’s length is measured from the front edge of the bed to the tailgate edge. You can also use your truck’s VIN to find out the exact length of your bed. Once you have this information, you can print out a printout of the specifications for your vehicle. This build sheet has information about the engine type, gearbox, bed length, and interior amenities, including factory extras.

Midsize trucks are a great option for people who don’t need a full-size bed. Midsize trucks have short or standard bed lengths, and they can carry people and equipment with ease. You can also choose a midsize truck with a long bed for aesthetic reasons.

How Wide is a Full Size Truck Bed?

To find out the width of your full size truck bed, measure it between the rear bulkhead and the inner side of the tailgate. Be sure to measure twice to ensure that you get the correct measurement. Most truck accessory companies round their measurements up to the nearest half foot.

Once you’ve measured the width, you can measure the length. The actual length of your full-size truck bed will vary from make to model. You’ll want to use a tape measure that will fit between the inside bulkhead and the tailgate. Make sure that the tape measure is straight and not bent. Do not count the exterior parts of your truck – it will throw off the measurement.

The width of a full-size truck bed is usually the same as the width of a mid-sized truck. But depending on the work that you’ll be doing, the bed width may be less than the actual width.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks