Skip to Content

Can You Still Get Parts For Sterling Trucks?

The Sterling Trucks Corporation was a manufacturer of medium and heavy-duty trucks. The company’s early models featured cab-over designs, and were available in one-, two-, and five-ton capacities. During the first World War, the company decided to change its name to “Sterling.” Since then, the company has produced a variety of medium-duty trucks. It has also manufactured military vehicles. The last model was made in 2009.

Despite the popularity of Sterling trucks, it is hard to find parts for these vehicles. The parts are not easily available and can cost a fortune. If you are a proud owner of a Sterling truck, it is important to find the right part to fix your vehicle. There are a few places to purchase Sterling parts online. You can also purchase Sterling parts at an authorized dealership.

Who Makes Sterling Truck Parts?

Sterling truck parts are manufactured by many different companies, but the company behind the trucks is the Sterling Trucks Corporation. The company was established in 1907 and is now owned by Daimler AG. During its history, Sterling Trucks have produced medium and heavy-duty trucks in many different capacities. The company was based in Redford, Michigan and sold trucks and trailers across the United States, Canada, Australia and New Zealand.

Sterling Trucks was a division of Daimler-Benz until it was acquired by Freightliner in 1997. It produced several types of trucks, including Class 8 tractors, medium-duty cab/chassis trucks, and light-duty vehicles. It also produced the Sterling Bullet truck, a heavy vocational truck that was later discontinued.

Sterling trucks use a Cummins ISB electronically controlled diesel engine. This engine delivers up to 215 horsepower.

Who is the Manufacturer of Sterling Trucks?

Sterling trucks first began production during World War Two. The company built several types of military trucks. These trucks were used by the U.S. Army Corps of Engineers, Navy, and Air Force. The production of these trucks increased after the war because of increased demand for trucks. The company also produced civilian versions of their trucks for use by the Army Corps of Engineers.

Originally, the company’s name was Sternberg Motor Truck Company, which was founded in 1907. The company later changed its name to Sterling because of anti-German sentiment in the United States. It built a wide range of heavy-duty trucks from 1-1.5 to five tons. During World War II, the company also supplied trucks for the Army Corps of Engineers and the U.S. Navy. Today, the company is a global player in the heavy truck industry.

READ ALSO:  What Does a Stock Truck Mean?

In addition to making trucks, Sterling also offers professional transport services for its trucks. Some companies specialize in transporting Sterling trucks. Heavy Haulers provides professional transport services for these vehicles.

Is Sterling Out of Business?

As an international construction company, Sterling has multiple subsidiaries that focus on a variety of construction services. They include E-Infrastructure Solutions, Building Solutions, and Transportation Solutions. The E-Infrastructure Solutions segment develops large-scale site development systems and services. Building Solutions includes commercial and residential concrete foundations, parking structures, and elevated slabs. Transportation Solutions includes highways, bridges, light rail, and water, wastewater, and storm drainage systems.

Daimler Trucks North America has decided to phase out its Sterling Trucks brand and focus on the Freightliner and Western Star brands. The company is also consolidating its manufacturing plant network. The Sterling brand will be phased out in March 2009. Daimler AG declined to comment on the decision. However, Dave Elliot, president of the Canadian Auto Workers Local 1001 at the St. Thomas truck plant, told CBC News that the last new truck was completed on March 4, and that Daimler began removing most of the plant’s equipment. The company will then auction off the remaining vehicles.

Manchester City are in desperate need of a striker, and a move to Paris Saint-Germain would make sense for Sterling. But the Spanish giants would have to release Neymar, Lionel Messi, and Kylian Mbappe to make the deal work. But it is still possible Sterling will stay at City. The English international would like to sign a long-term deal with the club, and City are keen to tie him down for a longer period. Sterling’s future with City is likely to be one of the most interesting storylines this season.

What Motor is in Sterling Trucks?

Sterling trucks have several different types of motors, including diesel and gasoline. Founded in 1896, Sterling truck company produced a variety of different models. The company positioned itself between Freightliner and Western Star, slotting between them in the market. It also continued production of the second generation Ford Louisville/AeroMax conventional product line. In the mid-1920s, it was one of the largest truck manufacturers in the United States, with over 1,000,600 vehicles produced.

READ ALSO:  How to Load a Flatbed Truck?

The first Sterling truck, the G-series, was a cab-over that tilted to the front. This unique feature wasn’t duplicated until the early 1950s. The front end of Sterling trucks was also a unique design. They featured a grille that was a cross between waterfall grille-work and an iron grille. In addition, the fenders were full pontoons. A typical J-series truck weighed about 12,775 pounds and had a capacity of eight to twelve tons. They were sold for around $8165.

The company began as a small independent heavy truck manufacturer. However, it was purchased by the White Motor Co. in 1953 and retired two years later. The Sterling name was a brand that stuck around for a while, but was later taken over by Freightliner. Freightliner manufactured both class 8 heavy-duty semi-tractors and medium-duty cab-and-chassis models. In the early 2000s, the company was owned by Daimler Trucks North America. Since then, the company has gone through several changes. Several models have been discontinued or changed from their original version.

Does Autocar Still Make Trucks?

The company started making trucks in 1911, but its popularity declined during the Great Depression. Its Type XVII truck, a one-and-a-half-ton vehicle, only sold 3300 units during the 1920s. Sales subsequently plummeted to a mere 1000 in 1932. During the war, it continued to suffer as the company suffered from a severe economic downturn.

Autocar is still around, but in a different form. In 2001, GVW Group LLC purchased the company and the Xpeditor truck model from Volvo Trucks North America. In 2003, the production facility was relocated to Hagerstown, Indiana. Autocar pioneered the refuse market with the Model U, but today they specialize in vocational trucks, such as concrete pumpers, paint strippers, and gravel conveyors.

The company has a nationwide network of service facilities in the United States. It also sells to municipal and private fleets. In addition, Autocar has occasional sales in Australia.

Is Sterling Trucks Made by Ford?

While Ford merged with Freightliner in 2006, Sterling’s name remained in use. The parent company is based in Arkansas, and runs more than 1,200 Sterling trucks in the U.S. The company plans to add 80 additional dealers to its roster by the end of the year. Its parent company also owns Freightliner Cargo, a new truck built on Business Class chassis and available in Class 6-8 truck and tractor versions.

READ ALSO:  How to Build a Mini Semi Truck Go Kart?

In World War Two, Sterling made a line of heavy-duty tractors to haul heavy tanks. While none of the heavy-duty models entered production, Sterling did develop experimental trucks that were similar to Ford trucks. These experimental vehicles included the 8-ton 6×6 T28 tractor. Later, Sterling introduced the T26 series and the T35 series of trucks. The T26 series of trucks included an 8-ton and a 12-ton truck with extra crew space, known as a crew cab.

The company started manufacturing trucks in Milwaukee in 1906. Initially, it was called Sterling Motor Truck Company. However, it was given the Sterling name in 1916, because of Sternberg’s German heritage and the general dislike of Germans during World War I. Sterling trucks were manufactured in many countries, including Canada and the United States. The company changed hands a few times in its history. In 1998, it became a division of Volvo Trucks.

Is Sterling Owned by Dodge?

When you hear the words “Sterling,” you might think of a former division of Freightliner. While this may be the case, the company was not owned by Dodge. Instead, the company rebadged Dodge trucks, producing heavy-duty Class 6 and Class 7 trucks.

You can save a lot of money by buying a used vehicle. A used car offers the same benefits as a new vehicle, but the price is less than the one you would pay for a brand-new vehicle. This means that you will get more bang for your buck.

When you buy a used vehicle, check the model number to see if it is a Dodge or a Sterling. It is common for people to confuse the two names. However, the two companies are actually affiliated with each other. When you buy a used vehicle from a dealership, you should get a copy of the invoice.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks