Skip to Content

What Size Trucks Should I Get For a Longboard?

The width of your longboard’s trucks is crucial to the rider’s comfort. The typical width is between 150mm and 180mm. Choosing the right width is important, as wider trucks will make it harder to control your board’s turn. However, you can always modify the width later.

Before selecting longboard trucks, you should consider the shape and style of your board. Old school mount patterns have holes spaced 2.5” apart on the deck length, while new school mount systems have holes that are 1.625” apart along the length. The exact placement of the trucks will depend on the deck’s mounting holes and wheel clearance.

The baseplate angle of the trucks is also an important factor to consider. It determines how well the board turns, so choose the right angle for your riding style. High-angle trucks tend to turn better, while low-angle trucks are less stable.

Are All Longboard Trucks the Same Size?

When it comes to longboarding, all trucks are not created equal. Longboard trucks typically measure 150mm to 180mm in hanger width. For the best stability and turning, choose a truck that’s around the width of your board. Wider trucks are more rigid and can provide better grip, but they can also be harder to turn and run the risk of wheel bite. Narrow trucks, on the other hand, provide a more responsive ride and are more forgiving when turning.

Longboard trucks are also made to differ in height. The height of a truck is the distance from the baseplate to the middle of the axle. The height of a truck can vary greatly, but if you want to increase the height of your truck, you can use riser pads or shock pads. You will need to buy a new bolt pack if you decide to do this.

Trucks are also different in shape. While they should be proportional to the width of your board, you should also consider the size of the wheels. For wider boards, the trucks should be higher. While this isn’t a big deal, it can prevent you from doing certain tricks and can make your board look odd. However, if you’re looking for stability, it’s important to have a truck that’s proportional to the width of your board.

READ ALSO:  How Much Does an Owner Operator Truck Driver Make?

Do Trucks Matter on a Longboard?

Longboard trucks matter, and you should choose a size that’s appropriate for the length of your board. Generally, trucks should be the same width as the board, but they can be longer or shorter. Wider trucks will help you turn smoothly and maneuver more easily, but they also put more weight on the board. Smaller trucks will allow you to turn more smoothly, but they may also be less stable.

Longboard trucks can either face forward or backward. This is a personal choice and depends on the type of riding you’ll be doing. Many people prefer to ride their boards facing forward for more maneuverability, while others prefer a stiffer feel at high speeds. While both styles can work, it’s important to get a feel for which one works best for you.

Another consideration is how much rake a board’s trucks have. The more rake, the more precise a turn is, and the speed of turning increases as you lean over. However, these trucks tend to wear out faster than other types of trucks.

What Trucks Should I Buy For My Longboard?

When choosing trucks, you need to understand how they work and what their effect on the board is. You should choose a truck with a hanger width of 150mm to 180mm, and an axle width of the same length as the length of the deck. Thinner trucks tend to be faster and easier to turn, but they also put more leverage on the board. This will make your ride less stable.

Another factor you should consider is mounting style. You can get trucks that have either reverse kingpins, or traditional kingpins. In the case of reverse kingpin trucks, the axle is inverted. The axle is usually softer than a standard axle to help with maneuverability and turning. However, if you’re going downhill, you’ll need stiffer trucks for better stability.

The height of the truck is also an important factor to consider. Truck heights should be lower than your wheels, otherwise you’ll be putting too much pressure on the rails, which can cause you to wipeout.

READ ALSO:  How to Change Brake Pads on a 2006 Ford F150?

What Size Trucks Should I Get?

To find the right size trucks for your longboard, first determine the length of your deck. Most longboard trucks are available in two different lengths – 150mm and 180mm. The width of your hanger and the width of your deck should match, in order to get the right balance and control.

Trucks are attached to the deck by bolts. The standard bolt size is 10-32″ (ANSI B1), but some companies may use a different measurement. For example, some skateboards use 3/4” bolts and thick riser pads, while others use the standard one of 8″. Make sure you measure the bolts from bolt to bolt so that the bolts are even with the edges of the deck.

The width of the truck should be proportional to the width of the deck. You should also consider the size of the wheels. Trucks with larger wheels can be more stable, but they may also restrict some tricks.

Why Do Longboard Trucks Have 6 Holes?

Longboard trucks must have the right amount of holes to mount them properly. The number of holes depends on the length of the truck. Short trucks should have holes on the bottom face, whereas long trucks should have holes on the top face. The top face holes will help the board flex and accommodate both concave and convex shapes. Alternatively, bottom face holes will allow you to experiment with different mounting positions.

The thickness of the axle is another important factor. Usually, the trucks are made from either brass or aluminum. Aluminum longboard trucks are usually thicker and stronger, but they are not as rigid as steel trucks. The thickness of the axle is another factor that determines the strength of the truck. In skateboarding, bent trucks are a common problem.

Longboard trucks are often drilled New School, but some have six holes, which can be problematic. These trucks have been influenced by the recent longboarding boom. New School longboard trucks are more stable, but they also tend to be longer and have higher toe boxes.

READ ALSO:  What to Take to a Monster Truck Show?

How Wide Should My Trucks Be?

A good rule of thumb when determining the width of your trucks is that they should be proportional to the width of your deck. However, you should also take the size of your wheels into account. Wider boards may need higher trucks than those with narrower decks. This isn’t a big deal, but it can limit your options for performing technical tricks. It can also look a bit weird. However, it won’t affect your board’s stability.

Typically, longboard trucks are between 150mm and 180mm wide. This size is perfect for longboards with a wider deck. They are also commonly equipped with reversed kingpins. Unlike the standard type, the reversed kingpin truck has the screw facing inward, which makes it easier to turn the board. In addition, reverse kingpin trucks offer more stability and are more responsive.

Choosing the right truck width depends on the length of the board and the width of your hanger. Remember, the hanger’s width determines the width of the wheel track.

Should Longboard Trucks Be Loose Or Tight?

When choosing a skateboard, a key factor is to make sure that the trucks are tight enough for your body weight. If the trucks are too loose, your board will wobble and shake when you’re on the road. A good way to check the tightness of the trucks is to turn the axle nut clockwise or counter-clockwise.

If you’re a beginner, tighter trucks are recommended for your first few rides. This will give you more stability and control of your board, and will help you turn more easily. The right trucks will also keep you safe during your first few tricks. You can experiment with the tightness of your trucks to find the perfect fit for your board.

While tight trucks aren’t necessarily better than loose ones, they’re recommended for big framers. Loose trucks can cause wheelburn and wheelbite, and if you’re heavier, it may be difficult to stay balanced while riding a wobbly board.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks