One important thing to know when choosing a skateboard truck is its width. While some trucks are 129mm, others are closer to 145mm. It’s important to understand the difference between the two measurements because this is where the wheels and bearings are located. In addition, you will want your board to line up with the axle.
You should choose a skateboard truck that’s proportionate to the width of the deck. You should also take into account the size of your wheels. Wider boards tend to require taller trucks. While this isn’t a major problem, it can interfere with advanced tricks and look a little weird. Wider trucks also tend to have less clearance, so they don’t offer as much stability.
Choosing the correct size trucks for your skateboard is important because they can make all the difference in how your board sets up. Trucks come in many different sizes, and it’s easy to get confused about the right ones. Luckily, we’ve put together a guide to the sizes and brands of skateboard trucks.
How Do I Know What Size Truck to Get?
One of the most important factors when choosing a truck is its axle width. The axle is like the heart of a truck and is where the wheels and bearings are located. It also has a pivot cup that allows you to steer your truck.
The width of a truck depends on the width of the hanger and the axle. The greater the width, the more stable the board will be. Depending on the rider, a different width may be better suited to a certain style of riding. For example, a board with an axle width of 7.25 inches may be more responsive than one with a smaller axle width.
What Truck Size Should I Get?
Choosing the correct truck size for your skateboard deck can have a huge impact on the setup. However, choosing the right size is not always easy, especially for beginners. In this guide, we’ll explain the different measurements and brands of skateboard trucks, so you can choose the right one for your deck.
The most common size for longboard trucks is around 150mm or 180mm. These trucks are meant for wider decks and feature reversed kingpins. While this may seem strange at first, the reversed kingpin design increases responsiveness and stability. The difference between reverse and standard kingpin trucks is subtle but significant.
The width of your deck is a huge factor when choosing the correct truck size. A truck size should be proportional to its width, while also taking the size of the wheels into consideration. If your deck is 7 inches wide, you might want to go with a higher-than-average truck size. While this may not be a big deal, a higher-than-average truck may get in the way of more complex tricks. Nevertheless, it’s not a safety issue.
Should Trucks Be Same Width As Deck?
When choosing a skateboard, it is important to choose a truck that is the same width as the deck. If the truck is too narrow, the board may feel unstable and will have limited turning performance. Wide trucks can also cause the wheels to catch on cracks and curbs, causing premature wear and tear.
Trucks should be proportional to the width of the deck, but be sure to take the wheel size into consideration. A wider board may require taller trucks than a narrow one. While this isn’t a huge problem, it can interfere with some more complicated tricks and make the board look weird. But overall, trucks should always be the same width as the deck.
Another important factor in truck width is the axle. The axle is the part of the truck that contains the wheels and bearings. The hanger, like the core of the truck, is attached to the axle and bushings. These components help to steer the truck.
Do Truck Sizes Matter?
When looking to buy trucks for your new 7 Inch deck, you should make sure to understand how they fit. Different truck brands have different sizing systems. For example, Venture trucks start at 5.0 inches while Thunder and Independent trucks start at 5.25″ inches. Using a table guide can make the process a little easier.
The width of the trucks is another important consideration. A narrower truck will be more stable and will give you more stability when doing tricks. A low truck also performs better on circles. One centimeter can make a big difference in the distance and angle of contact. On the other hand, a high truck will cause the skateboard to move more to one side of the rail. This is because the fulcrum between the foot and the rail is longer.
The width of your skateboard’s deck is also a crucial measurement. When choosing your skateboard, it is important to match the truck width to the width of your deck. If the two are not the same, then you might end up with a skateboard that is too narrow for your feet.
What Size Deck Does Tony Hawk Ride?
Tony Hawk rides an 8.5″ truck on his skateboard. Previously, he was skating on a pro-sized 9.0” board, but has now switched to an 8.5″ truck. He uses proper gear, common sense, and chooses safe skating areas. While Tony Hawk is considered an expert skateboarder, many other pros use boards with different size trucks to keep their feet on the ground.
The 8.5″ truck that Tony Hawk rides nowadays is a lot smaller than the one he rode in the past. Tony is also known to have ridden larger decks in the past, which was more comfortable for him. However, if you’re just a beginner, you should consider getting a board with a slightly wider wheel to help you balance.
What Size Deck Do Pros Use?
A skateboarder should always consider the size of his or her body before choosing the size of his or her deck. Shorter people should pick smaller boards, which are easier to maneuver. It will also be easier to get used to the movements of a small skateboard. Generally, skateboard decks are between eight and nine inches wide, but they can be wider or narrower depending on your personal preference. You can consult a deck sizing chart to find out what size deck you need.
The size of the deck used by pro skateboarders varies depending on their style and skill level. Some prefer a thinner deck, which allows them to perform more advanced tricks. Other pros prefer to use larger and thicker boards. However, the average skater can do well with a smaller deck.
The width of the skateboard deck will vary depending on the skater’s height and the type of tricks they want to perform. A narrower board will make trick skating easier, while a wide board is better for ramps and vert skating. The length of the skateboard deck will also differ. Small children can skate with a board that’s 28 inches or less, while teenagers can skate with boards that are 30-31 inches or wider.
How Tight Should Your Trucks Be on a Skateboard?
The correct tightness of your skateboard trucks is essential for a successful ride. A skateboard’s trucks should be tight enough to prevent the deck from tilting. If you find your skateboard’s trucks too tight, you should loosen them. The right amount of tightness is between five and seven. This range is ideal for board-flipping, bounce-jumping, and a stable landing after flipping.
To check if your trucks are too tight or too loose, you should tilt the board. To test the board’s tilt, push down on the deck and then shift your weight to your toes. This tilt will cause the trucks to pivot, which allows you to turn your board easily. You can also loosen the kingpin nuts on your trucks if you are uncomfortable with the tilt.
The correct tightness of your skateboard trucks depends on your skill level. If you’re a beginner, you may not need to tighten your trucks very often. But if you want to try new tricks, tight trucks will make you feel more stable and prevent you from falling off.
Learn More Here:
3.) Best Trucks