Skip to Content

What Size Truck Tool Box Do I Need?

There are a few factors to consider when choosing the correct size tool box for your truck. First of all, consider the types of tools you typically keep in your vehicle. For example, do you usually carry power tools? Or are you mostly likely to use tools that are longer? Tool box storage capacities can range from 6.5 cubic feet to over nine cubic feet.

In addition to the size, you should consider the clearance. A truck tool box must fit within the clearance of the bed. To determine the proper size toolbox, a technician will measure your truck and recommend the proper size tool box. This measurement will take into account the distance between the rails on the inside and outside of the bed, the width of the bed walls, and the height of your truck bed. The tool box should not interfere with the visibility of the driver or the visibility of the cargo room. In addition, it should not hang over the sides of the bed or block the rear view mirror.

While the concept of truck tool boxes may seem simple, the actual size varies. Truck tool boxes typically come in two categories: full and mid-size. The full size tool box is designed for larger trucks, while the mid-size box is best suited for mid-sized pickups.

Do Truck Toolboxes Fit All Trucks?

To determine if a truck toolbox will fit your truck, you’ll need to measure the bed’s length and width. This is a relatively simple task that requires just a tape measure. Measure the length of your truck bed from the bottom edge of the bed rail to the top rail of the bed. Also, determine the height of the truck bed. If it is not long enough to accommodate a toolbox, you’ll have to settle for a smaller toolbox.

Truck toolboxes come in two main types: chest-style and box-style. Chest-style toolboxes sit directly on the truck bed floor and aren’t higher than the bed rails. This type of box also does not interfere with the driver’s view. However, chest-style toolboxes take up space in the bed and can limit cargo capacity.

A high-quality toolbox will have a strong lid, reinforced sides, and sturdy latches. The lid should be insulated from rain and snow, and the sides should be thick enough to keep tools safe. Some boxes also feature locking mechanisms, which are particularly beneficial if your tools are expensive.

READ ALSO:  How Much Does a Rolls Royce Truck Cost?

How Do I Measure My Truck For a Tool Box?

To get the correct toolbox for your truck, you will first need to know the dimensions of your truck bed. Measure the height of your truck bed from floor to top rails to determine the maximum height of your toolbox. A standard-sized box won’t reach all the way to the floor, while oversized tool chests may extend above the bed’s rails. If your truck is full-size, you won’t have clearance issues, but if you have a mid-size truck, you’ll need to be careful about clearance, especially if your truck bed is flared.

Next, you need to know the dimensions of your cargo area. If you will be carrying multiple tools, you’ll need a box that has enough space to hold all of your tools. A toolbox with sliding drawers will make it easy to reach smaller tools and equipment. Also, you’ll want it to be weather-resistant. It should be able to withstand rain, snow, and ice, while also remaining durable and lightweight.

Should I Buy a Toolbox For My Truck?

Before purchasing a toolbox for your truck, it is important to take measurements of your vehicle. You will need to know the distance between the rails and the bed walls. If you purchase a box that is too tall, it will interfere with your visibility and safety while driving. To make sure that your toolbox stays secure, choose a unit that comes with mounting hardware.

Most toolboxes are made of aluminum, making them light and durable. This is a great feature because they will not corrode over time. Earlier designs of toolboxes used steel. They would be coated with a corrosion-resistant finish, but the steel would rust in some areas. In general, aluminum is the better material for toolboxes. You should also ensure that the toolbox is compatible with the other accessories on your truck.

Toolboxes for trucks are available in many shapes and sizes. They can be designed for side-access or front-access access, and they can come with dividers and push-button locks.

How are Toolboxes Measured?

A truck toolbox is generally larger than it is wide. The exact measurement is not always available, but the height of the rails on your truck bed is an important factor to consider. Unless the rails are high enough, a toolbox will not fit properly in your truck bed. In addition, different toolboxes will have different lengths. Some are tall and narrow while others are lower and wider.

READ ALSO:  How to Scrap a Truck?

The dimensions of truck toolboxes are different, but the general rule is that they are 35-3/4 inches long, 19-1/2 inches wide, and 18-1/2 inches high. Taller toolboxes can have trouble fitting in truck beds. Since these dimensions are common for all truck makes and models, most truck toolboxes are available in full-size and mid-size boxes. Some truck models, however, have flareside beds that require a narrower tool box.

Before installing a toolbox, measure the width of the bed. Some models include pre-drilled holes, while others do not. In these cases, you must drill your holes to fit the toolbox. To do this, you will need a powerful drill and a durable metal bit.

How Do I Know What Size Truck Bed I Have?

First of all, you need to measure the length of your truck bed. To do this, you can use a tape measure. Place the tape measure at the widest point and measure across to the opposite side of the bed. Once you have the length of the bed, match it to the name and length of the truck. You can also use a smartphone calculator to help you get the measurements.

The length of your truck bed is measured from the interior bulkhead to the tailgate. Be sure to measure in feet, not inches! It is important to note that these measurements often vary by manufacturer. You should know the actual length of your truck bed before you buy accessories. In addition to the length, you must also know how wide the truck bed is.

Another way to determine the size of your truck bed is to measure the height of the tailgate. If you have a truck with an 18-inch tailgate, the height would be 1.5 feet. You can also ask the parts department at your local dealer to tell you the bed size of your truck. Generally speaking, there are six different sizes of truck beds.

How Many Feet are Truck Beds?

The length of a truck bed varies from make to make and can be as short as 6 feet to as long as 7 feet. The length of a bed is measured from the front edge to the tailgate. For more information, check the VIN number on the truck’s build sheet. It will tell you everything from engine type and gearbox to bed length and other features.

READ ALSO:  How Much is It to Hire a Food Truck?

A measuring tape can help you estimate the length of a truck bed. Make sure to use a straight measuring tape so that it doesn’t get bent or twisted. Remember to measure the area twice to make sure it’s accurate. Using this measurement, divide the total length of the bed by the number of inches it takes to fill up the bed.

The standard length of a pickup truck bed is six to 6.5 feet, although there are trucks with longer or shorter beds. While the exact number of feet can vary, most trucks report an extra inch or two. For example, the bed on a Ford F150 is 6.5 feet long. A Nissan Titan bed is 66 inches long. Midsize trucks can have extra-short beds, while large trucks with long beds tend to be more powerful.

How Do You Mount a Tool Chest in a Truck Bed?

Installing a tool box in a truck bed requires knowing how to do it properly. First, you must choose the right spot and make sure that the box is secure. It should be sturdy and of the right size for your truck. Secondly, you need to choose a location that is easy to access and open. It is also important that the toolbox’s lid can open fully without any difficulties.

Depending on the tool box you choose, you may not need to drill any holes. Some of them come with hardware for mounting. For others, you may need to drill your own holes. You should use a powerful drill and a durable metal bit to drill the holes.

After installing your tool box, make sure you remove the rubber plugs from the holes that were drilled previously. Then, set up the tool box with J-hooks and secure it with bolts and nuts. You may also want to use rubber plugs to protect the rails and avoid scratching them.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks