Skip to Content

What is My Truck Bed Size?

There are two ways to determine your truck bed size. The first way is to look at your truck’s VIN number, which can be found on the inside of the drivers-side door jamb or on the bottom of the drivers-side windshield. Alternatively, you can visit the parts department at your dealer to find out. There are several different types of truck bed sizes on the market today. The most popular size is 6 feet.

Another way to determine your truck’s bed size is to measure the tailgate. The height of the tailgate is typically measured from the bottom of the truck bed. This measurement is usually given in feet. For example, a truck with an 18-inch tailgate would have a height of 1.5 feet. However, you must remember that all measurements are in feet. To figure out the cubic yardage of your truck’s bed, you need to divide the measurement of the tailgate by 27.

Once you’ve done that, you can start measuring the bed length. You’ll need a tape measure, a pen, and some paper. The tape should be long enough to go between the sides of the truck bed and the tailgate, without bending or twisting. Be sure to measure the length twice, too.

How Do I Know What Size My Truck Bed Is?

Using a tape measure is a quick way to determine the length and width of your truck bed. Start at the widest point and measure to the opposite end. You can also use a smartphone calculator or a pocket calculator if you want to get really precise. Once you have the measurement, compare it to the exterior dimensions of your truck.

The length of your truck bed will vary depending on the model and make. Make sure to check the manufacturer’s specifications. Sometimes, these specs will vary by a few inches. Also, it is helpful to get a friend to help you measure the bed length. Having another person hold the measuring tape will help you make sure to get the measurements straight.

READ ALSO:  How Many Cubic Feet is a Truck Bed?

Another way to determine the size of your truck bed is to measure the length and width of your truck. This measurement is usually the most accurate way to determine the bedliner size for your truck. You must make sure that you have a straight measuring tape that is parallel to the sides of your truck.

Can You Tell Bed Size by VIN?

One of the best ways to determine the bed size of a truck is to look at the VIN. This number can be found on the dashboard of your truck or on a sticker on the driver’s door jamb. You can also get the information from your dealer’s parts department. There are many sizes of truck beds today. Some are as long as 8 feet while others are smaller.

If you can’t get a VIN for a truck, you can look up its size by reading the label on the vehicle. Usually, this label will list the maximum weight a truck can haul safely. The user’s manual for the truck will also provide this information.

For example, a standard truck has a bed length of six feet, while a long bed is seven feet. The length is measured from the front of the bed to the edge of the tailgate. Entering the VIN number into a VIN decoder can also help you determine the bed size of your truck.

How Do I Know If My Truck is a Long Or Short Bed?

A truck’s bed length can be determined by measuring it. To do this, use a measuring tape and place it between the side walls of the bed. Make sure the tape is parallel and not bent. Measure it at least twice, so you have an accurate measurement. Then, compare the length to the corresponding length of the next-closest bed.

Some trucks have side compartments that can hold longer items. This can be a good option if you plan on carrying long objects. However, these compartments are likely to limit the amount of interior bed space. Ultimately, a short bed is more practical for everyday driving than a long one.

READ ALSO:  How Much Do Truck Drivers Make in Illinois?

A short bed is typically a five to six-foot bed. These are common in midsize pickup trucks. They are usually paired with full-length “crew cabs” or “extra cabs,” which are vehicles with four doors in the cab. Using this method makes it easier to maneuver around rough terrain.

How Many Inches is My Truck Bed?

To determine the length of your truck’s bed, you need to know the exact dimensions of your vehicle. This will vary depending on the make and model, and the manufacturer’s specifications. Some manufacturers round off their measurements, so you may need to double check your measurements. Remember to measure the distance between the bulkhead and the tailgate, as well as the inside walls of your truck’s bed.

It is important to know the length of your truck’s bed to find the right accessory for it. Although you may not need to use the bed of your truck to haul large items, it will help you to transport heavier items. Knowing the actual length of the truck bed will help you avoid any potential damage to your cargo.

The length of your truck’s bed is one of the most important aspects to consider when purchasing a pickup truck. You should know that there are three basic bed lengths – long bed, standard bed, and short bed. You can also check the dimensions of your truck’s bed by looking at its gas filler flap.

How Wide is a 8Ft Truck Bed?

The width of your truck bed is the length of the truck’s bed minus its tailgate. Usually, manufacturers round up this measurement. You can get an accurate measurement by locating the tailgate’s inside edge and using a measuring tape. Make sure that the tape is straight and does not bend. Also, be sure to measure twice. Once you have your measurement, you can choose the appropriate accessories for your truck.

READ ALSO:  How to Install a Gator Truck Bed Cover?

There are several factors to consider when choosing the right bed size for your truck. You might need a long bed for work or you may need a short bed for recreational purposes. The standard length of a truck bed is eight feet, but some manufacturers offer shorter beds with six-foot beds.

Besides length and width, another metric to consider is the volume. A standard truck bed is 71.4 inches wide. It is also eight feet high. Full-size trucks typically have a longer bed than mid-size trucks.

What Size Bed Does My Silverado Have?

The Chevrolet Silverado truck bed comes in a wide variety of sizes, and depending on your needs, you can choose a size that fits your needs. These beds typically support a maximum payload capacity of 2,280 pounds. These vehicles also feature numerous features, including a 120-volt outlet near the tailgate and lighting around the hitch.

When shopping for a new pickup truck, cargo space is often one of the first considerations. Depending on the model you purchase, you can choose a long or short bed. If you’re planning on hauling long, bulky packages, a long bed might be the best option. Long beds can also minimize the risk of accidents on the road.

When deciding which bed size is best for your needs, consider how much equipment you use on a daily basis. If you only need a toolbox or a small amount of cargo space, you should choose a Short Bed. Otherwise, you can go with a Regular Bed or a Long Bed, whichever you need. You can also choose a Crew Cab if you’re planning to haul more than one person.

What Size Bed Does My RAM Have?

Ram truck owners have a variety of options to customize their truck beds. The RAM 1500 and the RAM 2500 come with a variety of bed lengths, ranging from four feet to eight feet. If you’re looking for an extra-long bed, you’ll want to consider the RAM 3500.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks