Skip to Content

How to Tell Truck Bed Size?

To find out the length of a truck bed, use a tape measure. Measure the bed from one side to the other, top to bottom, and at the highest point. The measurements should be within a few inches of the stated length. Once you have the exact measurement, you can purchase accessories that will fit your truck.

You can measure the width of a truck bed by measuring from the inside edge of the sidewall. The length of the bed is the distance from the tailgate to the bottom edge of the bed. For instance, a bed with 18 inches of tailgate height would be 1.5 feet long. You must be level and straight while measuring to ensure you have a correct measurement. Then, write down the measurements and keep them handy for future reference.

To determine the length of a truck bed, use a tape measure to measure the distance from the inside bulkhead to the tailgate. Be careful not to bend the tape measure. You may want to place it over the opposite bulkhead so you can be sure you get the correct measurement.

How Do I Know What Size Bed My Truck Has?

First, you must measure the length of your truck’s bed. This can be done by stretching a measuring tape from the bulkhead to the tailgate. The length of the bed is typically listed in feet and inches, but the actual measurement may be different. You should round the number to the nearest few inches.

The length of the bed of a truck is determined by the distance between the inner side of the tailgate and the inner wall of the bulkhead. Note that this measurement might not be the same as the one listed on the product’s page because most manufacturers round their measurements to the nearest half-foot.

READ ALSO:  What are the Old Mail Trucks Called?

After measuring the length, measure the width. You can also measure the length from the top of the truck to the bottom of the bed. If you’re unsure about the exact length, measure it with a measuring tape from the inside of the truck. Make sure that you measure both sides of the bed.

Can You Tell Truck Bed Size by VIN Number?

If you are looking for the right accessories to fit your truck, you should know the bed size first. This can be done by using the VIN number of your vehicle. The VIN is usually located on the odometer or a sticker in the driver’s door jamb. You can also call the parts department of your dealership to get the measurements.

The VDS index can give you a lot of information about the body and engine of a truck. It can help you know the make and model of the truck, and that can be very useful if you are ordering a large truck. Besides that, you can also get the size of the truck’s bed using this method. Typically, a truck bed is about six or seven feet long, measured from the front edge of the bed to the tailgate edge. Using the VDS index, you can also determine how big the bed is.

If you don’t have a VIN number, you can still get the size of a truck by looking at the label on the vehicle. The label will tell you how much weight it can safely haul. The label also lists the Gross Vehicle Weight Rating, or GVR, of the vehicle. This number is also listed in the user manual.

Are F150 And F250 Beds the Same Size?

Ford introduced the F250 pickup truck in 1998. This truck is a midsize pickup that comes in two standard bed sizes: the long box and the short box. The long box is the standard length, while the short box is just over 6 feet long. Both bed sizes are available in the Supercab and Crew cab configurations.

READ ALSO:  Can You Fit a Sofa in a Truck?

When comparing truck bed sizes, you should consider what type of use you’ll be doing with the bed. A short bed will make it easier to maneuver around town, but a long bed can be more convenient for hauling construction materials. Whether you plan to use the bed for hauling materials or storing personal belongings, consider the size of the bed.

The Ford F-150 has a standard bed size of six feet, but you can get a long bed in the F-250. A long bed will make your bed longer, which will increase your capacity. It also limits your seating space. You can find out more about the bed size of a Ford F-150 at a dealership near you.

What Size Bed Does My Silverado Have?

The Chevy Silverado comes in several different bed sizes, so it’s important to find out which one suits your needs. If you’re going to be using the truck for work, the bed size is important. These trucks are built for work, but they’re also built for comfort.

You can choose from a standard, short, or long bed depending on the model you want. The bed size you choose will affect the size of your cargo space. Check with your dealer to see if the bed size you want is available in your chosen model. If you’re in the market for a new truck, you can also select a cab with a double cab and a crew cab.

The bed of your new Chevy Silverado is a great place to haul your belongings. This model’s bed is class-leading. It’s equipped with a MultiFlex tailgate for easy access and a heavy-duty Durabed with 12 tie-downs. It also has the option of an EZ Lift power lock.

What Size Bed Does My RAM Have?

If you are looking for a truck that can take all of your stuff, the RAM 1500 family has some excellent truck bed options. These beds range from 5 feet 7 inches to 6 feet 4 inches. In addition, the RAM 3500 has a bed that’s eight feet long and six feet four inches wide.

READ ALSO:  How Many Hours Can Truck Driver Drive?

How Do I Check a VIN Number For Free?

To find out if you have the right size truck bed, first determine the length of the bed. The bed length is the distance between the inside wall of the bulkhead and the tailgate. The length will depend on the model and make of your truck. Most manufacturers round these measurements to the nearest half-foot.

The bed length of a standard shortbed truck is six feet, while the length of a standard longbed is seven feet. In addition to the length of the bed, you can also find the VIN number on your truck. This can be found on the odometer, or in the driver’s door jamb. Knowing your VIN will give you a better idea of the bed length, which is a useful information for truck purchases. Also, it will let you know if your truck has any factory extras.

Next, you should take a tape measure and stretch it from the bulkhead to the tailgate. Ensure that the tape measure is straight and does not bend. Also, measure the length, not the exterior parts of the truck. Then, you can multiply the length by the width.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks