Skip to Content

How to Reset Oil Life on 2013 Ford F150?

If your Ford F150 has an oil life warning light, you’ll want to know how to reset it. Oil life is a measure of how long your oil has left to protect internal parts. There are several methods to reset oil life, and each one will have slightly different procedures. Listed below are 3 methods you can use on your 2013 Ford F150 to check the oil life. This will also work on vehicles with different types of dashboards.

First, make sure you turn your vehicle’s ignition switch to the “on” position. Next, find the settings menu in the dashboard. Press the settings button and hold it down for two seconds. Then, select Oil Life Reset from the list of options. Once the oil life reset has been completed, you’ll be able to manually adjust the percentage of oil you’ve used. This will reset the oil life indicator to 100% again.

How Do You Reset the Oil Life on a 2013 F150?

In order to reset the oil life on a 2013 model Ford F150, you must first find the settings menu on your car’s in-dash display. Click the Settings menu, then select Oil Life Reset, and hold the OK button. Once you have chosen your oil life reset mode, restart your vehicle to ensure that the new settings are saved. You can then follow the same steps to reset the oil life on any model Ford F150.

The oil filter in your car’s engine is responsible for keeping your engine clean. This is because it carries dirt and other particles to the filter. Regularly changing your oil will help reduce the risk of dirt and debris building up in your engine. Oil filters will also prevent your car from consuming unnecessary fuel. So, it’s a good idea to check the oil filter on your 2013 Ford F-150 as often as recommended.

How Often Should I Change Oil in 2013 F150?

To maintain your 2013 Ford F-150, change the oil regularly. The owner’s manual recommends changing the oil every 7,500 miles, but these guidelines are based on optimum conditions. Instead, it is best to change the oil sooner. This is because industry standards recommend changing the oil sooner. To avoid damaging your F-150, use the proper oil for your model. SAE 5W-30 oil or 5W-20 oil. You should use about 6.0 ounces of oil if your vehicle is equipped with a 3.7-liter engine, and 7.7 ounces if your vehicle has a 5.0 or 6.2-liter engine.

READ ALSO:  How Much Does a 1999 Ford F150 Weigh?

You should also check your tire’s tread and rotate it after every oil change. You should check it whenever you stop to get gas and fill it up if it is low. It’s also important to swap out the transmission fluid and power steering fluid every 60,000 miles, because these two fluids keep the engine and transmission lubricated and cool. To make sure that you are doing all of these tasks, check the owners manual or your owner’s manual.

How Do You Check the Oil on a 2013 Ford F150?

The first step in checking your oil level is to locate the dipstick. These are located on the front side of your truck. The dipstick will tell you whether the oil level is low enough or not. Oil is an important part of your engine, as it lubricates it and helps it run smoothly. Make sure the oil level isn’t too low, though. Some vehicles even have an electronic sensor to warn you if oil is running low.

When you notice a warning light on your dashboard, you can quickly remove the engine and check your oil level. The Ford F150 has a low oil warning that will let you know to stop driving. It is not recommended to drive your truck if the level is low, as this will damage the engine. Be sure to park on level ground and check the oil level before starting the engine. If the oil level is low, wait about 10 minutes to let it drain. Make sure the engine is seated fully, too.

Where is the Reset Button on a 2014 Ford F150?

You’ve likely been wondering where the reset button on a 2014 Ford F150 is. The good news is that it’s located near the odometer. You can access this button by pressing it at specific strengths for five seconds. After this, the fuel gauge will display its information and you can continue driving. To reset the gauge on your own, follow these steps:

READ ALSO:  How to Program Garage Door Opener on 2019 Ford F150?

If your radio doesn’t work, try resetting the system. It’s possible that your radio has been on for weeks without working properly. The problem may be the radio’s fault. If it doesn’t work, you should contact your Ford dealer and get a replacement. Often, the problem is simply the relay. This switch cuts power to the fuel pump and restores it after you’ve reset it.

Your vehicle’s onboard diagnostics system contains a code that identifies the problem. Using an electronic scan tool (ECU) to read these codes can help you diagnose the problem. Do-it-yourselfers can use a code reader to check the engine’s fault codes. The key is to remember that this tool only gives you a quick diagnosis of the problem, not a full diagnostic.

How Many Quarts of Oil Does a 2013 F150 Take?

You may wonder, How Many Quarts of Oil Does a 2013 Ford F150 Take? To get a reliable answer, check the manual. The 2013 Ford F150 takes 5W-20 oil. You can use motor oil with the same specifications if you want. The EcoBoost engine requires 5W-30 oil. This oil is suitable for both gasoline and diesel engines. The manufacturer recommends Motorcraft oil for Ford F150.

The Ford F150 is manufactured by Ford and has 11 trim levels. Each trim has its own recommended oil type. To learn the specific oil amount and change time, open the manual to the appropriate trim. For example, SAE 5W-20 oil is recommended for the 3.5L Ecoboost engine, while SAE 5W-30 oil is recommended for the 5.0L engine.

If your 2013 Ford F150 needs an oil change, visit David McDavid Ford to schedule an appointment. They are happy to answer any questions you may have about your vehicle’s oil change needs. You can trust them with your truck’s service and repair. The team will know exactly how much oil you need to change your oil and give you a free quote! You will be glad you did!

What Oil is Best For 2013 Ford F150?

The 3.5L EcoBoost engine in the Ford F-150 requires SAE 5W-30 oil. The Ford owner’s manual suggests using Motorcraft FL-500S oil filter for this vehicle. SAE 5W-30 oil is the correct choice for this engine. It helps to increase fuel economy while maintaining performance durability. You should always use the recommended oil level based on your vehicle’s mileage, mpg, and other factors.

READ ALSO:  What is the Bolt Pattern on a 2019 Ford F150?

For best results, you should use a synthetic oil. This type of oil has better protection and lubrication performance than conventional oil. A standard oil change interval is seven to fifteen thousand miles. Follow your vehicle’s manual for recommended intervals. You should change the oil every 3,000 miles or so, or as recommended by your owner’s manual. You can also purchase a high-quality oil filter to keep your car running smoothly.

To avoid engine damage, use synthetic oil. A synthetic oil contains no additives and is better for your vehicle’s engine. The best option is to rotate synthetic and conventional oils every other oil change. If you can afford it, use full synthetic oil. It reduces deposits and oil changes. Blended oils are an inexpensive option. However, Ford recommends using a blend every other oil change. If you don’t have the money, you can use a higher quality oil.

Where is the Oil Dipstick on a 2013 Ford F150?

The location of the oil dipstick on a 2013 Ford F150 will depend on which engine type is installed. If you have a front-wheel-drive truck, it is located near the rear of the vehicle. If you have a rear-wheel-drive truck, it is located near the front. Regardless of engine type, the location of the dipstick will vary slightly. If you have trouble locating the dipstick, simply turn it around. The metal stick bends naturally in the direction of the curve.

Checking the oil level on your Ford can be messy, but the process is quick and easy. You can wipe off oil drips with a lint-free rag, and you may want to wear gloves. It is a good idea to check your oil when the engine is warm, so you can make sure you’re not wasting oil on cold oil. Warming the engine up can also make the process easier. Wait at least 10 minutes before you start checking the oil level. You can also park your vehicle on a level surface before you start checking the oil.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History