Skip to Content

How to Reset Oil Change Light on 2010 Ford F150?

To reset the oil life light and the oil change reminder on your 2010 Ford F150, you should follow the instructions found in your owners manual. The instructions apply to all 12th and 13th generation Ford F150 models, including the 2009-2020 model year. To reset the light on your 2010 Ford F150, turn the ignition on and press the select/reset stem button for two seconds. After that, turn the ignition off and try the process again.

After resetting your oil life light, go to the Settings tab on your dashboard. Choose Vehicle from the left-hand side. Then, press the OK button. Once you have done this, start the engine and make sure that the oil life light has gone away. If it stays on, you must change your oil. This will prevent further damage to your engine. However, you must note that the oil life indicator is not specific to any specific car.

How Do You Reset the Oil Change on a 2011 F150?

If your vehicle’s oil life indicator is flashing, you should know how to reset the light and start your car again. The oil life reset process depends on the type of vehicle, but generally it’s as easy as pressing the button on the steering wheel. To reset the oil change indicator light on a 2010 Ford F150, turn the ignition to run. Press and hold the select/reset stem button for about 2 seconds. When the oil reset button is 100%, the light will turn off.

Press and hold the select button for three or four seconds, then press and hold the arrows to scroll through the display mode. In some vehicles, the display will show the message “Engine Oil Change Soon.” To turn off the message, select the MENU icon and then press the right arrow to select the ENGINE INFORMATION mode. Next, select TRUCK INFORMATION and press and hold the select button for two to three seconds.

How Do You Change the Oil on a 2010 Ford F150?

When you’re changing the oil in your Ford truck, the “oil life” indicator light on your dashboard will come on. Fortunately, it can be reset – even by the owner! To do this, simply turn off the ignition and locate the settings for your vehicle. You’ll find the oil life reset controls on the left side of your steering wheel. Press the up and down buttons to toggle the settings. After doing this, start your vehicle to verify that the oil life indicator is reset.

READ ALSO:  What are Jake Brakes on a Truck?

To reset the oil light on your 2010 Ford F150, you’ll need to go to the setup menu. If you have a message center, you can press and hold the “reset” button on the steering wheel for two seconds. Hold the button until the oil reset percentage reaches 100 percent. Once you’ve done this, the oil change indicator will go back to green. You can then restart your Ford F150.

How Do I Reset My Ford Oil Change?

If your oil life reset indicator is on the dash of your vehicle, you can easily do it yourself. First, make sure that you have shut off the ignition. Then, you need to access the menu of settings in the clusters. Next, locate the button for oil life reset on the steering wheel. Press it for three to six seconds until the oil level is at 100 percent. After that, you can safely reset the oil life indicator.

Depending on your vehicle, you may need to perform this procedure several times. To do this, make sure that you know the exact steps to take. Some vehicles may have an automatic oil change reminder while others do not. The process for oil life reset may vary, so be sure to refer to the manufacturer’s manual for instructions on how to do it. If you are unsure of your specific vehicle, you can contact Ford’s technical support for help.

How Much Oil Does a 2010 F150 Take?

The Ford F-150 is the best-selling full-sized half-ton pickup truck on the market. It is also the first truck to have a fourth door on the SuperCab trim level, and was the first truck to offer a rear-hinged access panel for storage. It also has a V-8 4.6-liter engine that can hold 6.1 quarts of oil. The recommended motor oil for a 2010 Ford F-150 is 5W-20, which is suitable for the truck’s engine. The recommended filter is also listed in the table, and Motorcraft is the recommended oil brand.

READ ALSO:  How Much is an Oil Change on a Diesel Truck?

The owner’s manual is an excellent resource to determine how much oil your Ford F-150 needs. It lists the oil capacity and provides instructions on how to change it. The manual also provides helpful information, including any open recalls and customer reviews. By following these guidelines, you can make sure your 2010 Ford F-150 will keep running for a long time. When in doubt, always consult the owner’s manual and ask your mechanic for an opinion.

Is It OK to Mix Synthetic Oil with Regular Oil?

Depending on the age and mileage of your vehicle, you may want to try mixing synthetic oil with regular oil. Conventional oil is recommended for your vehicle’s first 5,000 miles. The most common grades of conventional oil are 5W-20, 5W-30, and 10W-30. While conventional oil is the cheapest type of oil, it doesn’t perform as well in extreme driving conditions. To keep your vehicle’s engine functioning at its best, use synthetic-blend oil.

You can also try mixing different brands of motor oil. Generally, you can mix Quaker State(r) and Pennzoil motor oils without harming the engine. Make sure the viscosity and weight of the different brands match. If you are unsure, a professional technician can help you make the right decision. Changing the oil regularly is important for your car’s efficiency and reducing the need for frequent maintenance.

The best time to change your oil is before your vehicle’s engine’s odometer reaches 75,000 miles. Older vehicles have looser gaskets and seals. Synthetic oil can clean out these sludges and deposits and act like a seal. Oil leaks can damage the engine and cause it to burn oil. That’s why many people opt to use synthetic oil.

How Do You Check the Oil on a 2011 Ford F150?

Changing your oil is an important part of maintaining your Ford F-150. Oil not only provides lubrication to your engine, it also helps keep the temperature of your engine block low. Cool engines run better. It is therefore important to check the oil level in your vehicle every few months. In order to check the oil level on your Ford F-150, follow the steps below:

READ ALSO:  How to Change Oil in 2003 Ford F150?

The engine oil filler cap should be turned clockwise until strong resistance is felt. Never remove the cap while the engine is running! Using supplemental engine oil additives may cause further damage to your engine. Your vehicle’s warranty may also not cover engine damage. If you accidentally add more oil, it’s a good idea to use an absorbent cloth to wipe off the spillage. Once the cap is securely installed, turn the engine off to check the oil level.

If you have an EcoBoost engine, make sure to use SAE 5W-30 oil in the engine. If you don’t know what oil to use, consult your owner’s manual to determine what type of oil your car needs. Its V8 engine, for example, uses seven quarts of oil. Using a heavier oil will cause severe engine damage and void your warranty.

How Much Oil Does a 2011 F150 Take?

If you’re wondering how much oil your Ford F-150 takes, you’ve come to the right place. Here’s how to figure out the specific oil requirements for your model. The Ford F-150 has several engine options, and this guide will cover the details for each. Motor oil cools and lubricates moving parts in the engine, which keeps its internals in good condition.

To properly care for your Ford F-150, you must choose the proper type of oil and fill it to the proper capacity. If you’ve got a V8 engine, you’ll need a 5W-20 oil for it. The Motorcraft brand is API certified and uses the correct oil for your Ford. You can also find information about the recommended oil weight in the owner’s manual.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History