Skip to Content

How to Reset Oil Change Light Ford F150?

If you’ve noticed that your Ford F150 is showing you that the engine oil needs to be changed, you’ll need to learn how to reset the oil change light. You can reset this light using your vehicle’s owner’s manual, and it will work for any model from the 12th to the 13th generation. Follow these steps to reset the oil life light:

First, turn on the ignition. Next, press the left control button to navigate to the menu page. Press the right-up arrow to activate the display mode. This will reset the oil life light. Press and hold the button for about 10 seconds. Once you’ve done this, start your car. The engine will then start, and the oil life light should be gone. You can also try pressing the right control button, which will reset the oil life light.

Next, locate the button for the oil life reset. It’s usually located on the steering wheel keypad, on the left. Press and hold the button for three to six seconds, or until the green bar fills up 100%. This method is applicable to any model year from 2019 to 2020. If your truck doesn’t have this feature, you can still reset the oil life light by following the above steps. You may also want to read:

How Do I Reset the Oil Life on My 2021 Ford F150?

To reset the oil life in your 2021 Ford F150, first, you need to turn off your engine. Press and hold the trip button on the steering wheel for about four to six seconds. This will open the setup menu. Once you’ve reached this menu, you’ll need to press the right arrow button and scroll down to the ENGINE INFORMATION. From there, you can click on TRUCK INFORMATION.

Next, you’ll need to push and hold the select/release button on your dashboard for about two seconds. When you do this, you’ll notice the oil life indicator in your dashboard will go back to 100%. Now, you can adjust the percentage that you’d like. You can also reset the oil change reminder message if the light keeps blinking. You can do this with the directional pad on your steering wheel.

To reset the oil life on your 2021 Ford F150, you’ll need to follow the steps outlined below:

How Do I Reset My Ford Oil Change?

How to reset the oil life light on Ford F150 is easy enough once you understand how the system works. First of all, you should make sure that your ignition is off. Press the left control button to navigate to the menu page, and then press the right up arrow to activate display mode. Once this is done, the oil life light should no longer display. You can now perform the oil change. Follow the steps below to reset your oil life light on Ford F150.

READ ALSO:  What Type of Gas For Ford F150?

The trip button turns on the ignition without starting the engine. Hold it for four to six seconds, until the setup menu appears. You can then press the oil life indicator button and wait for the light to come back on. If you’re unable to locate this button, press the ignition key for four to six seconds. Once the light comes back on, turn the key off. This is a quick way to reset oil life on Ford F150.

How Do I Reset My Oil Life Monitor?

If you’re having trouble figuring out how to reset the oil change light on your Ford F150, you may need to know how to use the instrument cluster to clear it. You can do this by pressing the right arrow button on the steering wheel. Then, select the settings menu from the instrument cluster and click on “oil life”. The oil life is an indicator of how long your car’s oil is expected to last. You can reset it by clicking on the arrow next to the message center, which should show a number in percentage.

Once you’ve gotten to the ‘Oil Life’ screen, press the trip button on the steering wheel. Press the trip button for four to six seconds until you see the settings menu. Press and hold the select button for three to four seconds until the “Oil Life” indicator is 100%. You can also use the arrow buttons to scroll through the MENU and select the display mode you want to view. If you don’t see any of the icons on the instrument panel, try pressing the arrow buttons again.

How Do You Reset the Oil Light on a 2018 F250?

Once you’ve performed an oil change, you might be wondering how to reset the oil life reset. First, you need to go into your vehicle’s settings and select the oil life reset percentage. This should bring the oil life reset back to 100%. Once you’ve done this, you should see the reset button on the dashboard. Press it for four to six seconds to confirm that the oil life reset has worked.

READ ALSO:  How to Connect Bluetooth to Ford F150?

The next step is to find the menu on your vehicle’s dashboard. This will typically be located on the steering wheel. Once you have chosen the menu, press OK. You will see a bar on the screen with the oil life reset percentage. Press OK. Then, choose the percentage you’d like to reset. Once the percentage is reset, the oil life reset will be completed.

Now, you’ll need to push the oil life telltale until it reaches 100%. If the oil light continues to blink, you may have a problem with the oil pressure sensor. This small plug detects a drop in oil pressure. If you notice the oil light blinking, the sensor is most likely the culprit. If it’s working properly, it will keep the oil life telltale off.

How Do You Reset Oil Light After Oil Change?

The oil life reset feature is part of the oil indicator and pump. The engine picks up dust and dirt as it drives and the condition of oil is critical for engine performance. The oil should be clean and free of dust so that it can do its job. It should also be changed regularly. You can reset the oil life light by pressing the appropriate button on the dashboard. Once the reset is complete, the oil light will turn off.

If you’re unsure how to reset oil life light on Ford F150, you can refer to the vehicle owner’s manual. The manuals contain information for the 12th and 13th generation Ford F150 models. The manuals also contain maintenance tips. To reset oil change light on Ford F150, you should perform these steps:

Why is My Change Oil Light on After Oil Change?

Your car’s oil pump is a crucial component. Oil lubricates engine parts and is the lifeblood of your vehicle. A proper oil level protects the engine from heat and friction. Low oil levels can damage the engine very quickly. If the oil light continues to illuminate, the problem likely is with the oil pump or the oil level. To resolve this issue, follow these steps. 1. Stop driving your vehicle.

Check the engine’s oil pressure sensor. If the light stays on after oil change, the sensor or circuit is faulty. You can replace the sensor easily and inexpensively. Sometimes, the person who performed the service forgot to clear the service records. If this is the case, the person performing the service may have forgotten to clear the engine’s service records. Otherwise, you can call a mechanic and have them check the engine.

READ ALSO:  How Much is a Truck Lease Payment?

The first step to reset the oil light is to stop driving. If you haven’t stopped for oil, try to reapply a new filter. If you are unable to do this, contact the manufacturer of your vehicle for assistance. Some automakers have special instructions on how to reset the oil light. Otherwise, your local mechanic can perform the reset for you. There are three basic steps to reset the oil light.

How Do You Change the Oil in a 2018 Ford F150?

If you’ve recently had your truck’s oil change light come on, you’re probably wondering how to reset it. The good news is that it is simple, and there are three different methods. One of these methods is to press and hold the “OK” button for 3 seconds. This will reset the oil life indicator to 100%. However, you should be careful not to push the “OK” button too far. The light might blink again.

To reset the oil change indicator, you must be seated in the driver’s seat. Then, you should select the “engine information” option. Press and hold the OK button for five seconds. After you’ve completed the reset, you should see 100% on the oil indicator. The oil life indicator is located on the dashboard, and it indicates when you need to change your oil. To reset it, follow the steps outlined above.

Next, turn on the vehicle’s ignition. Press and hold the brake handle while pressing the select button. Press and hold the arrow button for three to four seconds. You’ll see a restart symbol. Now, you should be able to reset the oil change indicator in your 2018 Ford F150. This process may seem difficult, but it’s actually quite easy. And remember, if your oil change light comes on when you’re driving, you can always turn the engine off until you’re able to change the oil.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History