Skip to Content

How to Remove Tail Light Cover on Ford F150?

Do you need to replace the tail lights on your Ford F150? If so, you may be wondering how to remove the covers. They are an important safety feature of your vehicle, letting other drivers know if you’re backing up or need to make a sudden stop. If you’re looking for a cheap alternative, you can find replacement tail light covers at an aftermarket retailer for much less than you would pay at the dealership. These aftermarket tail light covers fit perfectly and look just like the originals. Don’t ever use duct tape to replace them, as this will not allow light to pass through and will not look good on your car.

How Do You Remove a Rear Tail Light Cover?

If you’re wondering how to remove the rear tail light cover on your Ford F150, you’ve come to the right place. If you’re not sure how to proceed, this video will teach you how. To begin, open the tailgate and locate the bolts on the backside of the tail lights. Loosen these bolts with a socket wrench. Be careful not to pull the bolts out of the niche; they might fall out.

If the cover is cracked or faded, you’ll need to replace it with a new one. While F-150 tail lights look nice, they’re an important part of safety. Replace them as soon as you notice them. If you’re unsure how to replace the cover, check out AutoZone’s comprehensive selection of truck and car parts. You’ll find all kinds of parts and accessories, as well as Same Day Store Pickup and Free Shipping.

Can You Replace Just the Plastic on a Tail Light?

One of the most important pieces of equipment on your Ford F150 is the tail light assembly. This piece of equipment combines the tail lights, brake lights, and turn signals. If you find that one of your tail lights has become defective or broken, you will need to replace the entire assembly. You can purchase a replacement tail light assembly from an automotive part store like Advance Auto Parts.

READ ALSO:  What is the Bolt Pattern on a 2002 Ford F150?

Check the fuse on the tail light. This fuse will light up if it is good. If not, replace it with a new fuse of the same amperage and size. If you are unsure of the fuse, you can check the bulb with a multimeter. You may need to remove the tail light cover to get at the bulb. Some cars have an access panel that allows you to remove the plastic part.

The process to change the tail light covers is not difficult, and it only requires basic tools. Compared to the labor cost of hiring an auto repair shop, you can save up to 50 percent by changing the plastic. You should shop around for the right tail light cover to save money on the labor. When you do, be sure to compare prices, as the cheapest one is always better.

How Do You Open a Tail Light Cover?

Taking the tail lights off your truck is relatively easy. To remove the covers, you can loosen the bolts located on the back of the tail lights. You should watch for any bolts that may fall while you’re working. Once you’ve removed the covers, you can install new ones. Make sure to follow all instructions carefully, so you don’t damage the tail lights in the process.

Changing the bulbs in your Ford F150 is easy. You simply need to follow the steps outlined in this video. Depending on your vehicle, you might be able to use another bulb in the tail light cluster instead. If this happens, you can replace the entire cluster of lights. Just make sure that the new bulbs are the same ones as the old ones, or the old ones could burn out faster.

How Do You Remove a Tail Light Housing?

To replace the tail light bulb, you must first remove the entire assembly. You can do this by unscrewing two bolts and pulling it straight out. You will need to be gentle while removing the tail light housing. Be sure to remove the old bulb and dispose of it properly. The old bulb is made of glass. Replace the tail light bulb with a new one. Once you’ve removed the housing, you can now install the new tail light bulb.

READ ALSO:  How to Reset Brake Light on Ford F150?

The original light bulb is located in the small grey socket in the center of the tail light. To remove it, turn the socket 1/4 turn counterclockwise, pull it straight out, and then screw in the new # 921 bulb. Use a high-quality Sylvania 921 LL light bulb, or an LED compatible 921 bulb for brighter reverse lights. Make sure to check the socket for rust, and tighten the socket to prevent further damage to the tail light housing.

How Do You Remove a Tail Light From a Truck?

If you have a Ford F150, you may be wondering how to remove the tail light cover. The taillight assembly is attached to the tailgate by 8mm bolts. To remove the tail light cover, you must remove the bolts by gently pulling it out of the niche. Make sure not to pull the light cover too far out of the niche, or it may tear the wiring. Then, follow the instructions to remove the tail light assembly and reveal the tail lights.

Before you begin, make sure you have a working flashlight. A flashlight may be handy, but you’ll need to be able to see the bulbs underneath. In this article, you’ll learn how to remove the tail light cover on a Ford F150. To do so, follow the steps below. Once you’ve removed the tail light cover, you can install the new tail lights.

Do I Need to Replace Taillight Cover?

Is your truck showing signs of age, such as cracked or broken taillight lenses? If so, you may need to replace them. However, it is not necessary to replace the entire taillight. You can easily replace them in your own time, if you know how to do it right. To install new taillights, follow these steps:

READ ALSO:  How to Become a Armored Truck Guard?

Remove the taillight/turn-signal cover from the bed. Remove the screws that secure it to the taillight and remove the cover. You will notice exposed wires and a bulb holder. Push the holder in to disconnect the bulb. The bulbs are removed by twisting them counter-clockwise. Replace them with the new ones and test them to make sure they function properly. If the bulbs are still working, the replacement process is straightforward.

Now that you have removed the taillight assembly, you can remove the bulb from the housing. Make sure to avoid ripping the wires, as you don’t want to damage them. Before installing the new taillights, unclip the wiring harness from the old bulbs. Turn the bulb base to unlock it from the housing. When you are done, you can place the new bulb into the housing.

Do I Need a Tail Light Cover?

If you’re looking to improve the aesthetics of your Ford F150, consider a quality tail light cover. These can be purchased at an automotive store or online. Look for ones that fit your car’s style and are durable. Check that they’re made of the proper materials, too. A quality tail light cover can make your vehicle look great and be a functional piece of automotive decor.

Moreover, tail light covers can extend the life of your vehicle’s tail lights. Even small accidents and miscalculated parking can cause the taillight covers to crack and get damaged. Once the covers are damaged, the tail lights are exposed to dirt, mud, and moisture. These conditions can lead to premature bulb burnout. For this reason, tail light covers are crucial to protect your vehicle’s tail lights.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History