Skip to Content

How to Measure Pickup Truck Bed?

A tape measure will help you to get the exact measurement of a pickup truck bed. You should begin by measuring the length of the bed at the broadest part and continue to the inside edge of the tailgate and bed rail. Measurement may vary a bit depending on the angle of the tape measure. You can also use a smartphone calculator to get more precise measurements.

Once you have the width of your truck bed, you can measure the length of the bed by measuring from one side to the other. Make sure that you do not count the truck’s exterior sides. Similarly, you can measure the height of the tailgate from the bottom of the truck. Make sure that you do not bend or overlap the tape measure. Remember that these measurements are in feet. Adding the length and width together will give you the total area of the truck bed.

A truck bed’s length is important for carrying large objects. Knowing the bed’s dimensions is essential for the truck to have the right amount of capacity. You can also make sure that you get accessories that fit in your truck properly.

How Do I Know If My Truck is a Long Or Short Bed?

One way to tell if your truck has a long or short bed is to measure its length. You can do this by starting your measurement at the inside edge of the sidewall of the bed. You should use a straight and level tape measure. If you have a truck that is not very long, try measuring it again from the tailgate.

The length of your truck bed is important for several reasons. First, it makes it easier to move around. Long beds are typically better for hauling large loads and are more convenient for towing. Short beds are great for maneuvering around town, but are not the best choice for work or recreational use.

A long bed has a longer wheelbase than a short one. Typically, a 6.5-foot bed will have a wheelbase of 163.7 inches, while a short bed will be about five feet long. This distance can vary from one model to another.

READ ALSO:  How to Make Your Truck Louder For Free?

What is the Bed Size of My Truck?

First, you’ll need to determine the bed’s width. The width is measured from the inside bulkhead to the tailgate, which opens at the back of the truck. Some people mistakenly believe that the inside bulkhead is the actual length of the bed, but this is not the case. In order to determine the bed width, you’ll need to find the width of the truck’s tailgate and the widest part of the bed. Then, you need to multiply the width by the length.

When buying a pickup truck, it’s essential to know the length of its bed. A standard truck bed is six feet long, while the longer beds are 8 feet long. Some truck makers deviate from these standard lengths, but most come with a standard length.

The bed size of a pickup truck will vary greatly, and many people don’t understand the differences. Some companies use the term “standard” to describe two different bed lengths, but it can also mean something completely different.

Can You Tell Bed Length by VIN?

When you need to buy a new truck, it is important to know the length of the bed. You can do this by referring to the VIN number, which is found in the lower left corner of the windshield, or by calling the parts department at your dealer. In many cases, you can also get the information from the dashboard.

The VIN number of a truck is usually a 15-character code. It can contain a lot of information. For example, if you know the length of the bed, you can use it to determine the overall length of the truck. The VIN is used to identify the type of engine, gearbox type, and bed size. It can also contain other information, such as factory extras.

The length of a truck bed is measured from the tailgate to the bulkhead. The measurements should be taken with a straight measuring tape. Make sure to measure twice to be sure. This information can be used to purchase accessories that fit the bed, so it is important to make sure to measure correctly.

How is the Length of a Truck Measured?

The length of a pickup truck depends on several factors, including the make, model, and payload capacity. For example, a regular cab GMC pickup truck is usually around seventeen feet long. A full-size F-150 with a long bed can be over twenty feet long. The bed length also depends on how much cargo you plan to haul.

READ ALSO:  How Much Does It Cost to Tune a Truck?

To measure the length of a pickup truck bed, you’ll need a measuring tape. Ensure that the tape is level and fits tightly between the side-walls. Also, make sure to measure twice for accuracy. The length of a pickup truck bed is measured from the bulkhead to the tailgate.

Pickup truck dimensions are crucial to understand when customizing your vehicle. While most standard parking spaces are 16 to 18 feet long, single-car garages usually have a maximum length of twenty-two feet. This means that a pickup truck that can tow a large trailer will be called a heavy-duty truck.

How Do You Measure the Length of a Bed?

First, you will need a measuring tape. Make sure the tape is long enough to fit between the side-walls of the bed. Hold the tape straight and avoid bending it. Measure twice to be sure you are getting the right length. The length of the truck bed is the distance between the tailgate and the bulkhead.

The length of a pickup truck bed varies from model to model. The length of the bed may be different than the advertised length, so it is important to get the right measurement. A good rule of thumb is one foot plus a half foot. This measurement should be accurate to within a couple of inches.

The height of a truck bed is also important. The height of a pickup truck bed is the distance between the bottom of the bed walls and the top of the wheel wells. This height is important because it determines how much space a truck bed has. Unfortunately, not all truck manufacturers report this measurement.

Is It Better to Tow with a Long Bed Or Short Bed?

While both trucks have their benefits, the difference between a long and short bed truck is not as big as many people may think. A long bed truck has a longer wheelbase, which provides better stability for heavy towing. It also offers better fuel economy, which is important for daily commuting.

If you don’t haul a lot of items, consider a short bed. This will save you money on insurance. Long beds are much more expensive to repair and replace, so you’ll want to shop around for cheaper insurance. Long beds are a better option for towing a fifth wheel, but for most drivers, a short bed should do just fine.

READ ALSO:  How to Replace Fuel Filler Neck on Ford F150?

Long beds are wider than short beds. This makes it much easier to tow large objects, but they may require you to park outside the garage or in the back of a parking lot. In addition, long beds don’t turn as sharply as short beds.

How Wide is a Full Size Pickup Bed?

The width of a full size pickup truck bed can vary greatly. It can be as narrow as 3.5 inches or as wide as 7.5 feet. Often, pickup truck manufacturers will round off these measurements to the nearest half-foot. Depending on the make and model, you may need a wider or longer bed to carry your cargo.

The maximum load a pickup truck can safely carry is called its payload capacity. This is the amount of weight that the truck and trailer combined can carry. It is important to know the maximum payload capacity and the maximum towing capacity of your pickup truck so that you can get the most out of it.

Whether you’re planning on using your pickup for work-related purposes or a weekend camp, it is important to measure the width and length of the bed so you know exactly how much cargo you can load into it. You’ll also want to consider the sizing of accessories like tool boxes and bed rails.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks