If you’re interested in adding side steps to your lifted truck, the installation process is relatively simple. Most people can do it without professional help. To get started, follow the instructions provided by the company selling the steps. Once you have the necessary tools, lay out the side steps next to the truck. It may help to use a blanket or cardboard to protect the area where the side steps will be mounted.
Side steps are a convenient way to gain access to the truck bed. They also help with managing cargo. Side steps are typically made of steel, stainless steel, or aluminum and can support hundreds of pounds. They’re typically available in different models and are easy to install on most trucks. Using the right tools and following manufacturer instructions, most owners can do the job without hiring a professional.
To install side steps on a truck, you must take special care to avoid damaging the vehicle’s paint or its protective coatings. After installation, you should apply a rust preventative spray to the surfaces that will be in contact with the step. Then, clean the area regularly and apply a touch-up every couple of years. Be sure to avoid contact between the steel hardware and aluminum, as this may lead to galvanic corrosion.
How Do You Install Foot Steps on a Truck?
Installing foot steps on a truck is relatively easy and can make your ride more comfortable. Normally, the steps are tucked away against the body of the vehicle so that they do not collect road grime. They also provide a safer footing, and polished stainless trim can add subtle bling and a more classy appearance.
A pickup truck is usually taller than a sedan, making it difficult for someone to get out. Installing a pair of foot steps or a set of nerf bars can solve this problem and make the truck more accessible. The exterior accessories provide a safe stepping area and can be removed when not in use.
There are many types of foot steps available for a truck. You can install nerf bars, which are angled steps made of stainless steel or rounded tubing. Those designed for trucks and SUVs are available in diameters ranging from three to six inches. They can be angled or flat and can go from the end of the cab to the wheels. They are commonly available in black and stainless steel.
Can You Install Running Boards Yourself?
Before you attempt to install running boards on your truck, you should first read the installation instructions that come with the product. You should also purchase mounting hardware and a mechanical toolbox. Finally, you should wear protective clothing and put on a jack stand. The installation process can take several hours, depending on the size of the truck.
Some manufacturers offer easy-to-install running boards that require minimal assembly. Westin, for example, offers a bolt-on model that has triple brackets on each side. These running boards weigh about 25 pounds for a full-cab double-cab, which makes them lighter than most comparable running boards. They also have an easy-to-use mounting system.
Running boards attach to a truck using bolts that are either 10mm or 13mm long. You will want to install the running boards with the bumpy part facing down. You may also want to install paint protection film on the running boards’ surfaces to prevent them from scratching your truck’s paint.
What Tools are Needed to Install Running Boards?
When installing running boards, you will need the proper tools. Most models come with simple instructions that make installation a snap. You will need to drill holes and install screws, but it shouldn’t take you more than an hour. However, the tools you need may vary, depending on the type of boards you are installing. For instance, if you are installing power running boards, you will need specialized tools.
Another important tool is a hammer. This tool will be needed to strike the screws that will hold the boards in place. Make sure to use the correct size hammer for the job. Otherwise, you can end up damaging your vehicle or the running boards themselves. Using a hammer of the wrong size can cause damage to the board.
You should also consider the materials used for your step. Running boards are typically made of plastic, but you can also use diamond-plate steel. You can also choose to install a board made of rubber.
Are Nerf Bars Hard to Install?
Nerf bars are one of the most popular options for truck step systems. The reason why they’re so popular is that they look great and are extremely durable. Depending on the manufacturer, you may have to drill holes in your frame before installing the bar. If so, you may want to get some help with the installation.
Nerf Bars are an excellent choice for trucks because they make climbing into the cab easier. They also add style to the truck’s bottom end. Fortunately, installation is relatively easy. All you need are a few hand tools, a clear driveway, and some music to keep you entertained.
Nerf bars can cost anywhere from $125 to almost $500. The higher-priced options are likely to be made of better materials and have better finishes. They will also likely fit better, so spending a little extra money is well worth it.
How Do You Install Universal Side Steps?
Installing universal side steps on your truck may not be as difficult as you think. There are several options to choose from. The first type is a simple hoop-style step. This style is a good choice if you just want a small foothold. However, if you have a limited mobility or balance issue, you may want to go for a shortened running board. You may also want to consider drop-step nerf bars.
The installation process will vary based on the type of vehicle you have and the body style. Follow the directions provided by the manufacturer. You can purchase a set of instructions with the side step you’ve chosen. The instructions will be accompanied by step-by-step directions. Before installing the steps, make sure you check the body and the steps to make sure they will fit perfectly.
Aftermarket running boards are a great way to add style to your truck. These accessories are often interchangeable with nerf bars. They fit snugly to the bottom of your truck frame and have a step pad that runs the entire length. This allows easier access to the truck bed while adding functionality. Running boards also offer convenience in entering and exiting the vehicle. Some brands provide textured pads below the entry points.
Where Do Truck Steps Mount?
Truck steps are a great way to get into and out of your vehicle without climbing or stooping. While some installation methods can be tricky, most can be done by the average DIYer. Bully truck steps include mandrel bent curved ends, high impact plastic step pad, and 200-pound capacity.
There are different styles and mounting locations for steps, and the exact location will depend on your vehicle. The most secure location is on the frame, as this part is the strongest part. Be sure to check for proper mounting hardware. Many step manufacturers include the hardware you need to install your steps. If you’re unsure of how to install them, Steps Direct can help.
Another great option is LUVERNE Side Entry Steps. These running boards fit perfectly against rocker panels, and give you a safe, non-slip entry and exit. These trucks-specific steps mount to the rocker panels and have a stainless steel finish, which makes them durable and long-lasting.
Do You Have to Drill Holes For Running Boards?
If you’re considering adding running boards to your truck, you’ll need to know if you need to drill holes on the truck’s frame. In general, running boards will come with pre-drilled holes, but some trucks may not have them. If that’s the case, you’ll need to drill your own holes or hire a professional to do it for you.
Running boards provide extra support when getting into and out of your truck. They can also be used for traction when driving in wet and slippery conditions. You can choose simple or sophisticated versions, with LED lights for visibility and a retractable mechanism for easier removal. In either case, running boards attach to the frame with brackets. You may have to drill holes in the frame, but the mounting brackets will fit securely.
Running boards can be customized to fit your specific truck, brand, and cab length. You can also choose a powered running board, which can be stored underneath your truck’s cab. Powered boards also come with lights that turn on when the doors are opened.
Learn More Here:
3.) Best Trucks