The Husky brand of tools is well-known for its low prices and high quality. The company also offers a variety of truck tool boxes that mount on the side or behind the rear window of a truck. In order to install one, you’ll need a power drill and a socket wrench. The process should take less than 10 minutes.
The Husky truck tool box is made of high-quality commercial-grade aluminum. The lid is made of stainless steel, as are the handles. The material is corrosion-resistant and lightweight, but it is still quite sturdy. You can choose either a shiny aluminum finish or a black powder coat finish.
First, you need to measure the height and distance between the bed rails and the Husky truck tool box. The lid must have clearance from the cab. Next, mark the underside of the toolbox on both sides. Once you have marked the sides, you can remove the toolbox from the truck bed. Mark the five-inch line, which should run from the outside of the toolbox to the interior of the truck. If it doesn’t, drill a hole in the body of the truck to screw the tool box in place.
How Do You Install a Husky Toolbox on a Truck?
A Husky truck tool box can be a great addition to your rig. These boxes are manufactured with commercial grade aluminum and feature stainless steel handles. This material has a unique look and is lightweight while maintaining a high level of strength. Aluminum is also less expensive than stainless steel, and is corrosion resistant.
Truck tool boxes are indispensable for keeping tools protected from the elements. Husky truck tool boxes can be side-mounted or mounted behind the rear window of a truck. The installation process is fairly straightforward and usually takes under 10 minutes. Once you have purchased the box, you must secure it to the truck using a set of mounting hardware.
Before you start securing the box to the truck, you should first tighten the bolts with a spanner or a screwdriver. Make sure that the bolts are not over-tightened as this could cause damage to the truck. To make sure that the box is securely in place, load it with the essential tools you use most often. Remember to clean the box regularly and check the bolts for looseness.
How Do You Attach a Tool Box to a Truck?
When installing a Husky truck tool box, it is vital to follow the installation instructions. You should first measure the distance between the truck bed rails and the tool box lid to ensure the proper fit. Moreover, if you choose a crossover tool box, you must measure the length from the outside of the rail to the same point on the other rail. Also, you should be aware of the fact that some short bed trucks may not be able to accept a larger toolbox.
Once you have all the tools necessary to install the tool box, it is time to install the box on your truck. Some models are already fitted with holes for installation, while others require you to drill the holes yourself. You will need a power drill with a sturdy metal bit for the process. You should also make sure that the j-hooks are securely attached. After that, tighten the bolts and nuts properly. You should also clean and inspect the box regularly to ensure it is secure.
Before installing the Husky truck tool box on your truck, you should know the dimensions and type of your truck. Most Husky truck tool boxes are meant to be mounted above the wheel wells. They hang down a few inches and will fit most mid to full-size trucks. The size and style of the box will depend on the dimensions of your truck. Some of the models are designed to fit the bed rail directly while others can be installed side by side.
How Do You Strap Down a Tool Box?
A Husky Truck tool box can be easily strapped down to your truck using a few simple techniques. First, determine where you want the tool box to sit. Locate the holes for the hardware. Next, place the rubber j-bolt plugs into the holes. Then, poke the threaded part of the bolt through the rubber plug and into the bed rail.
There are two main types of Husky truck tool boxes, the crossover tool box and the side-mounted tool box. Both have their advantages and disadvantages. The crossover model is more secure than a side-mounted tool box because it’s bolted directly to the bed rail. But this mount is not suitable for vehicles with small bed openings.
Once you’ve determined the dimensions of your truck’s bed, you’ll need to decide where to mount the tool box. The best location is one that’s accessible and convenient for you. You don’t want to strap it to a side rail, because then you’ll have a hard time opening and closing the tool box when you need to use the tools inside. You’ll also need to consider where the tool box will be exposed to the elements.
How Do You Secure Tools in a Truck Bed?
There are several ways to secure a Husky truck tool box in a truck bed. One option is to use a drill to drill holes in the box’s side. Before you begin drilling holes, remove any rubber plugs from the holes. Once you have drilled the holes, tighten the j-hooks and use the screws and bolts to secure the box. Tighten them snugly but not so tight that they damage the bed rails.
Another way to secure a Husky truck tool box is to lock it. There are two types of locks available for Husky truck tool boxes: round key locks. The latter allows you to easily access the toolbox with the key while the former can be secured from both sides of the truck bed.
Once you have purchased a Husky truck tool box, you must find a location in the truck bed that will fit the toolbox properly. To choose the proper spot, measure the bed area and the toolbox. Choose a location where it will be easy to access and open, but isn’t affected by the truck bed’s rough terrain.
Do You Have to Bolt Down a Truck Tool Box?
If you are looking to mount a Husky truck tool box to your truck, you should know that there are a couple of different options. First, you can choose between a side-mount or crossover model. The former is better for access and allows you to mount the box on either side of the vehicle.
Some tool boxes come with mounting hardware, while others require drilling. Before you install a tool box, make sure to remove the rubber plugs that may be attached to the mounting hardware. Next, line up the bottom of the tool box with the holes in the truck. Once that is done, use standard nuts and bolts to mount the tool box to your truck. Most tool boxes require four to six bolts to secure them to the truck.
Most Husky truck tool boxes are designed to be mounted over the wheel wells. Because of this, they hang down a few inches. They will fit most full-sized and mid-sized trucks. This toolbox measures 48 inches long, and the top rests on the bed rail. If you’d like to mount your Husky tool box directly to the bed rail, you can do so.
Are Truck Tool Boxes Universal?
When buying a tool box for your truck, it is important to consider the size of your vehicle. Truck tool boxes are available in standard, custom, and semi-custom sizes to accommodate a variety of different trucks within the same class. To find out what size your truck needs, measure the length of its bed from the bulkhead to the tailgate. Then, divide that measurement by 12 inches.
A common tool box for trucks is a 40-inch tool box. It will fit most full-size and compact trucks. Its top-quality construction will protect your tools from the elements, while its low profile design allows you to fully utilize the bed. Some models even include a mounting kit so you can install the toolbox without difficulty.
Choosing the right tool box for your truck can be a confusing process. Make sure you choose the right size and material to suit your needs and budget. Make sure it fits with the other accessories on your truck.
How Do You Mount a Flatbed Toolbox?
A Husky truck tool box is a great accessory for your truck. It typically hangs a few inches over the wheel wells of your truck, making it easy to access. You can install one on either side of your truck or mount two side-by-side for maximum storage.
Once you have located the right spots, you can begin mounting your tool box. First, remove the rubber plugs from the existing holes on your truck. Next, align the bottom of the tool box with these pre-drilled holes. You can also use regular nuts and bolts to secure your tool box.
Husky truck tool boxes come with two mounting options. The crossover model is the most convenient to access, while the side-mount model allows you to reach tools from both sides of the truck. Both models will fit into the bed rail.
Learn More Here:
3.) Best Trucks