Skip to Content

How to Install a Flip Kit on Chevy Truck?

Installing a flip kit on your truck will help you lower the rear of the vehicle. These kits raise the rear axle above the leaf springs, so that it will sit lower than the rest of the truck. In many cases, you can lower your vehicle by up to 5 inches. Despite the name, flip kits do not actually flip springs.

When installing a flip kit on your Chevy truck, be sure to adjust the height of your truck’s axles accordingly. You may need to relocate the rear axle if you’re lowering your truck. It’s also important to measure the “slip” between the driveshaft and the transmission input shaft. If the yoke is too high, the axle may not sit flat, causing the rear axle to move.

How Much Does a Flip Kit Lower Your Truck?

When installing a flip kit, it is important to choose the right kind of spring for your vehicle. The right spring can lower your truck by up to two inches. Some flip kits come with coils at the front and leaf springs at the rear. The springs should have progressive-rate technology so they won’t sag. While leaf springs are best for lowering the truck, performance coils are also an option.

Generally, flip kits lower a truck from about six inches to seven inches. This is achieved by moving the rear axle up above the leaf spring pack. While some flip kits have a spring-free design, others use an axle-locator to maintain the correct pinion angle geometry.

Most trucks use leaf springs at the rear to support extra cargo capacity. Several truck owners choose to replace the factory leaf spring mounts with custom ones. These are also known as hangars or shackles. This change doesn’t affect the towing capacity of the truck.

READ ALSO:  How High is a Truck Trailer?

How Long Does It Take to Install a Flip Kit?

If you are considering installing a flip kit on your Chevy truck, you need to be patient, as it can be a trial and error process. You should allow up to 10 hours for the installation. A Belltech flip kit typically takes around four hours to install, provided you have the proper tools and work area. You should ensure that your vehicle is level before driving it after the installation.

A flip kit raises the rear axle of a truck from underneath the leaf springs to on top of them. The rear axle must be moved away from the transmission, as the axle is longer when it flips. You will also need to modify the steering box and cylinders.

If you are looking for an affordable way to lower your truck, a rear flip kit is an ideal choice. It can reduce the labor required and is a good alternative to installing air bags or “C-notch.” However, if you are lowering the truck more than seven inches, you may need to notch the frame. You will also need to buy new shocks for the rear suspension, as stock shocks don’t have enough travel. A pair of shorter shocks will restore ride compliance.

What Does a Flip Kit Do?

A flip kit is a modification that lowers the truck body by raising the rear axle above the leaf springs. It can lower the truck as much as five inches. The kit does not actually flip the springs, so you must use the proper tool for the job. The installation process is relatively easy, as it involves a few simple steps.

READ ALSO:  How to Get Dirt Bike in Truck Bed?

After you install the flip kit, the rear axle will need to be re-located. It will also need to be moved approximately 3/4 inch from the transmission. This is necessary because the drive shaft will become longer once the rear axle is flipped. The flip kit will provide a more level and smooth ride than without the kit.

Does Lowering a Truck Improve Handling?

Lowering your truck will make it easier to drive, but it will also decrease the life of your tires and decrease braking efficiency. This modification can also reduce your truck’s resale value. Be sure to consult a dealer before lowering your vehicle. You should also consider the safety factors before making any modifications.

The most common method for lowering a pickup is to lower the leaf spring. This modification will lower your truck and make it more maneuverable, but it will compromise your truck’s torque weight and cargo capacity. To make up for the loss in cargo capacity, you can install an airbag helper spring. If you are not comfortable doing this DIY, you can always hire a professional technician to do it.

Another consideration is the ride. While a lowered truck may seem rough, it will feel smoother and have better handling. However, it’s important to make sure you don’t lower your truck too much, as this can damage the drivetrain.

Does Lowering a Truck Affect Towing Capacity?

Lowering your truck won’t affect its towing capacity if you do it the right way. Make sure the mechanic uses good quality parts to ensure the truck’s safety. Cheap parts will break easily and may cause dangerous malfunctions. It is also not safe to lower the truck with factory springs because the spring rate may change.

READ ALSO:  How Much is a Dump Truck Topsoil?

Lowering your truck will lower the center of gravity, increasing traction and reducing the risk of rolling over. It also increases braking and acceleration time, which may increase your discomfort on a long trip. Lowering a truck can also affect its warranty. Some manufacturers won’t honor warranty coverage if you lower a truck.

When it comes to towing, airbags are essential. While these are costly, they’re necessary for a safe towing vehicle. If you’re unsure if your truck has airbags, consult your mechanic before lowering it.

How Do You Do an Axle Flip?

If you want to lower your truck, you can use a flip kit to do it yourself. This kit is designed to remove the rear leaf spring and reposition it below the axle. It also comes with a frame C-Notch kit, which you will need to drill and cut. If you have a pickup with an extended cab, you will also need to use a Carrier Bearing Relocator. This will allow you to lower the truck a little over six inches.

When lowering your truck, you may have to change the rear axle as well. Flip kits are available at auto parts stores. They have different parts that can help you do the job quickly and easily. Some flip kits include U-bolts, mounting plates, axle locators, and hardware. They may also include a C-notch frame element or other additional components to complete the flip.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks