If you have a faulty power steering assist system on your Ford F150, you may want to learn how to fix it. There are several possible causes, such as a wiring issue or a broken connection. Ultimately, a repair to this problem will require you to replace the entire steering system, which is a significant expense. To find the exact cause of the problem, follow these steps.
If the problem does not appear on your dashboard, you can try to reset the alert. The easiest way to reset the alert is to restart the car. This will reset the electrical components associated with the power steering system. Repeat this process two or three times. If the problem persists, you should visit a Ford dealership to have the system repaired. If the fault cannot be repaired in your local Ford dealership, you can contact the manufacturer directly.
The most obvious and simplest way to check if you have a leak is to use a friend to turn the steering wheel. If the belt is loose, it means the system is not working. If it does, tighten it. If it is loose, this could be a sign of a leak and affect power steering assist. The leak will also change the efficiency of your power steering system. During the drive, you may notice low fluid levels.
What Causes Steering Assist Fault?
A Ford F150 contact reported that his steering assisted with difficulty at various speeds, with the track assist light and hill descent warning light illuminated. He took his vehicle to a local Ford dealership where he had it diagnosed with a gear assembly failure. Despite the escalating cost of repairs, he has yet to receive a recall notification from Ford. However, he believes he should try the repair himself before taking the vehicle to a dealership.
The electric steering module reads torque and angle sensors to detect when a wheel is turning. It controls the torque and rotation speed of the front wheel, reducing power assist during high-speed steering. A damaged sensor can affect the vehicle’s speed, power assist, and other systems, affecting the car’s steering. If you suspect your F150 has a steering assist fault, you should contact a mechanic immediately.
What Happens When Electric Power Steering Fails?
You may have experienced a sudden loss of steering power while driving at highway speeds. The vehicle will show a “service advance trak” light, which means the battery is low. If you notice this light, turn signals will no longer work, and traction/stability control will no longer function. Power steering failure can be a result of a number of problems with the power steering rack.
Essentially, the electric power steering system contains an electric motor, dedicated module, and torque sensor. These components are connected to the rest of the vehicle and are powered by wiring and fuses. When one or more of these components are damaged, the power steering system will no longer function properly, causing the vehicle to lose balance. The electric power steering module also requires repair if it displays a warning light.
The problem has been reported to Ford for years, but they have not initiated a recall. In the meantime, they should take action now to fix the problem. While the company may not be willing to recall the truck in some cases, it should be aware of this problem and make the necessary repairs as soon as possible. If you’re wondering what happens when your Ford F150’s power steering system goes out, read on.
How Do I Fix a Ford Power Steering Assist Fault?
The most basic way to troubleshoot a power steering assist fault is to check your vehicle’s electronic systems. If the warning light is still lit, you should try to replace the steering column and steering gear, but these steps will do little to solve the problem. Using a scan tool to look for diagnostic codes will be a good idea. Occasionally, a power steering assist fault can cause a car to become rigid and unresponsive.
If you suspect that your car has a power steering assist fault, it’s essential to diagnose it as soon as possible. Failure of the steering system can pose a significant safety issue. This fault message is an early warning system to look for and fix. By identifying it, you can take appropriate action to resolve it. Here’s what you need to do. Here are the steps to troubleshoot your Ford power steering assist fault.
How Do I Reset My Electric Power Steering Pump?
If you’ve had a problem with your power steering pump in Ford F150, you may need to learn how to reset the electric power steering pump. This electronic system receives data from the angle sensor and torque sensor and reports it to the power steering module (PSCM). When the angle sensor malfunctions, the vehicle may lose balance and turn over. The problem can also be a result of a faulty wiring connection.
Restarting your car can reset the error codes and get the power steering back to normal. Sometimes, the steering rack is the problem, and a simple repair to it can save you a lot of money in the long run. If it doesn’t, you can try to replace it. Hopefully, this will resolve the issue. If not, you may have to replace the steering rack. If you’ve tried resetting the electric power steering pump without any luck, here’s how.
In some cases, incorrect wiring can cause steering to lock. Broken or damaged wires can’t send commands to other sensors. A professional programmer specializes in electric circuits. Make sure all of the wiring is replaced, since broken wires can interfere with the electric power steering pump. You should also check the rack. It may be corroded or have a faulty connector. Oftentimes, a broken fuse will prevent steering lights from working properly. If you’re still having trouble with steering, you should take your vehicle to a shop near you.
Can Electric Power Steering Be Fixed?
Your electric power steering may be malfunctioning. If this happens, your car might require a steering gear box adjustment or a new control module. A trained professional can troubleshoot these problems and repair them. To fix the problem, you need to check the steering wires and replace them if needed. In some cases, your car might need a new rack to properly calibrate the steering system.
The failure of the electric power steering system on some Ford F150 models is an immediate and major problem that can be costly to repair. Owners have reported their trucks’ power steering assist stopped functioning after approximately 90 to 120 miles of driving. The failures were major security concerns. The contact had tried to contact the manufacturer and dealership, but to no avail. The failure was linked to NHTSA campaign number 14v316000.
An electric steering module inputs data from angle and torque sensors and controls temperature. It also detects faults and alerts the driver via warning lights. If the steering system stops working, it can be due to malfunctions of the electric motor or the software. Damaged connectors and software could result in steering system malfunctions. A trained professional can troubleshoot error codes and repair the problem.
How Do I Reset My EPS Light?
The first step in resetting the Power Steering Assist light on a Ford F150 is to check for a broken or damaged fuse. This problem will result in a warning light indicating that the steering gear box needs adjustment. Depending on the type of electric steering system, resetting the light may be as simple as turning the ignition off and on again. For more detailed instructions, consult the manual for your vehicle.
The Power Steering Assist fault message indicates a malfunction in the system. The fault may be related to contaminated power steering fluid, a low level of fluid, or a damaged pump. Failure to perform proper maintenance can also cause a power steering assist fault. Resetting the error message is possible, but it does not guarantee a solution. Try it at least two to three times before relying on the information provided by your vehicle’s manual.
If you can’t get the power steering working again, consider replacing the steering rack. If this doesn’t work, you can try restarting your vehicle and clear the fault codes. It’s best to seek professional help, but if you’re a do-it-yourself mechanic, you can try replacing the steering rack. When a steering rack malfunctions, it may cause the warning to come on again.
How Do I Fix the EPS Problem in My Car?
Fortunately, there are easy ways to diagnose and repair this problem. Depending on the cause of the power steering fault, the problem can be as simple as incorrect wiring or broken wires. Broken wires can block the steering gear from sending commands to other sensors. If you suspect a wiring problem, it’s best to take your truck to a mechanic who specializes in electric circuits. Broken wires can be a serious safety concern and can even result in steering lock.
If the power steering fault message persists, you may need to restart your vehicle. This will clear any error codes. Don’t ignore the warning; ignoring it can lead to serious safety problems. Once you’ve done this, the power steering system will return to normal. Once your car has been restarted, check for the power steering fault again. If it still persists, contact your local Ford dealer.
Learn More Here:
4.) F150 History