Skip to Content

How to Fix a Tailgate Latch on Ford F150?

There are two main parts that make the tailgate latch on a Ford F150 work properly. The lock mechanism and the actuator rod are held in place by two bolts. To remove the tailgate latch, start by unscrewing the retaining cable and loosening the corresponding Torx bolt. You can also replace the latch itself. If you don’t feel comfortable replacing the latch, you can also try removing the lock mechanism.

First, remove the panel covering the tailgate. You may have to climb onto the truck’s bed to access this part. Once you’ve reached it, locate the tailgate latch assembly and unbolt it. Locate the rotating latch and the two threaded rods that are attached to the latch. These rods can be adjusted to fit your truck. If you notice that one of the rods is not attached properly, remove it.

Remove the tailgate assembly and find the bar that connects the two bolts. Once you’ve located the bar, remove the old handle and clean it with penetrating oil. Make sure to clean and dry the latch before putting it back in place. You can also use white grease to prevent the latch from sticking. If these steps don’t work, you can try replacing the latch with a new one.

How Do You Open a Tailgate When Latch is Broken?

Having trouble opening your Ford F150 tailgate? If you’re having trouble opening the tailgate, you may need to open it yourself. You can free the latch by releasing the locking rods on the tailgate assembly. There are two ways to free the latch: one is to unbolt it with a putty knife and the other is to remove the access panel.

To disengage the tailgate, locate the connecting rod at the center of the tailgate. Use channel pliers to pull the connecting rod until it frees up and the tailgate can be lowered. Getting the tailgate to come down, however, does not mean it is unjammed. If the tailgate is still stuck upright, it’s likely to jam again. Check for bent wires and remove the connecting rod.

First, remove the old handle. Locate the bar that attaches to the tailgate handle. Then remove the tailgate panel. The tailgate latching mechanism consists of two rods. To release the latch, clamp your vice grips on both rods. After that, unsnap the two nuts that attach the handle. You’ll need a 10mm socket to remove these nuts.

READ ALSO:  How Much Does a Concrete Truck Hold?

How Do You Get a F150 Tailgate Unstuck?

If your tailgate is stuck open, it may be time to open your truck. First, make sure the vehicle is unlocked. Then, locate the release button on the top of the tailgate handle. If you have the intelligent access transmitter, you must place it within three feet (one meter) of the tailgate to unlock it. Press the button for several seconds to release the liftgate. Occasionally, the tailgate might not close automatically if it is at a position more than half-way down. If this happens, manually lower the tailgate until the latch retracts.

To open the tailgate, first remove the handle. Then, you will need to unscrew the bolts holding it in place. These bolts are around ten millimeters in diameter. Once you’ve removed them, remove the handle from the tailgate. Make sure the latches are free and move freely by using a penetrating oil or white grease on the handle.

How Much Does It Cost to Fix a Tailgate Latch?

When your tailgate locks, you have to fix it to keep your cargo inside. The latch cylinder typically lasts the lifetime of the vehicle. Symptoms of a failing latch include a locking device seizing up or not closing properly. Modern vehicles rely on electrical communication between the lock cylinder and the vehicle. They may even be equipped with remote key fobs to unlock the vehicle.

To get started on the process, remove the tailgate handle from your truck. Then, locate the bar that attaches to the latch. You will need to replace the latch by unsnapping it. Make sure that the tailgate latch rod does not go behind the handle recess. Install the new handle using the same hardware that was used to attach the latch.

Remove the two black clips that hold the lock cover plate. Next, unscrew the bolts. Use a torque wrench to tighten them to 33-lbs. If your tailgate is installed, be sure to buy new bolts. You can buy a new tailgate latch with a 15-mm head. Then, install the new tailgate handle.

How Do You Manually Open a Ford Tailgate?

If you are having trouble opening the tailgate, it may be time to learn how to manually open a Ford tailgate latch. In some cases, this can be done without the assistance of a mechanic. However, if you have no experience with this process, this article will help you understand the steps. Follow these steps to successfully open your tailgate. Just be sure to follow the instructions carefully and be aware that if you do not do so correctly, you can cause damage to your vehicle.

READ ALSO:  What Kind of Gas Does a Ford F150 Take?

To begin, find the bar on which the latch is attached to the tailgate. Remove the old handle and locate the bar that connects to the latch. You can then use pliers or vice grips to pry the rod off the handle. Once the rod is free, you can pull the latch to the horizontal position. To fix a malfunctioning latch, check for other possible causes. If any of these factors are the culprit, you’ll need to purchase new parts or replace the entire latch assembly.

How Do You Open the Tailgate on a Ford F150?

To open the tailgate of your Ford F150, you need to locate the latch assembly located in the middle of the tailgate. Pull the rod to release the latch and open the tailgate. You may need needle nose pliers to remove these clips. Next, remove the two Torx bolts that hold the latches to the tailgate. Ensure that they’re disconnected from the actuator rod and connectors.

If you’ve gotten a remote control for your F-150, you can program it to open and close the tailgate when a specific button is pressed. You can also use your key fob to open and close the tailgate. The remote control will also allow you to lock and unlock the tailgate, but you’ll need to use the button on the remote to do this.

To fix a broken tailgate handle, locate the bolt that holds the latch on the tailgate. The bolts are around 10mm in diameter and must be removed with a socket and ratchet. Then, use the socket to remove the old handle and replace it. If the latch has become stuck, lubrication can help. Alternatively, a coat of white grease can help.

How Do You Unjam a Tailgate?

Often, a tailgate will get stuck open, or stuck closed entirely. To remedy this problem, you must first learn how to unlock a tailgate. Most models of vehicles are equipped with a manual tailgate release mechanism. However, in some cases, the tailgate can become stuck closed, so you must manually open it. Here are a few tips to get your tailgate working again.

READ ALSO:  Which Truck Has the Most Rear Legroom?

Firstly, remove the access panel to access the tailgate handle. You can then unscrew the two bolts holding the tailgate handle in place. There are latches on both sides of the tailgate. If one of them is stuck, it may be due to dirt or rust. Moreover, excessive effort to unlock the tailgate may lead to breakage or stress. To replace the latch, you can use penetrating oil or white grease.

To unlock the tailgate, you must first unlock your vehicle. Secondly, you must place the intelligent access transmitter within three feet (1 m) of the tailgate. Lastly, you need to press the release button on the top of the tailgate handle. Once you’ve released the transmitter, lift the tailgate up for a few seconds. If it is stuck more than halfway, you need to manually close the tailgate.

How Do You Open the Back of a Pickup Truck?

If you’re having trouble opening the back of your pickup truck, you may be wondering how to repair the latch. To fix the latch, you’ll need to take apart the lock mechanism. The lock mechanism consists of two components. The lock mechanism itself consists of two pieces, an actuator rod and a latch. The actuator rod holds the latch in place, while the latch itself is held in place by two torx bolts. The retaining cable must be removed and the locking mechanism must be disassembled to access the actuators.

To fix the latch on a Ford F150, you’ll need to remove the tailgate panel. The tailgate latch is attached to the tailgate handle. It is a small latch that operates from a rod. If it’s rusted, it can cause the tailgate to stick. In such a case, you’ll have to exert more force to open the tailgate. Eventually, the cast iron arms will break, leaving you with a broken tailgate.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History