Skip to Content

How to Change Battery in Ford F150 Key Fob 2018?

If the battery in your Ford F150 key fob has died, you may need to replace it yourself. In most cases, it is a simple procedure, and it only takes a few minutes. To replace the battery, first remove the battery cover. This will reveal the battery. Carefully flip the battery upwards so that the positive side is facing up. Next, replace the battery and test the door lock to ensure that it works.

Once the battery is removed, you should insert a flat screwdriver into the side of the key. Remove the cover by inserting the flat screwdriver. If the cover isn’t coming off, use a small coin to pop it off. Afterwards, pry out the battery with the help of the flat screwdriver. The battery should pop out easily. Be careful not to damage the key fob when replacing the battery, as you can damage the car if you put it back in the wrong place.

The LED light on the key fob will turn on when the key fob button is pressed. If the LED light isn’t illuminated, the battery is too low, and you’ll need to change it. In some models, you may need to press a button to release the key blade. On others, you may have to pull the key blade out manually. Make sure you follow all instructions, or the light will fail.

What Battery Goes in a 2018 Ford F150 Key Fob?

First of all, what type of battery goes in a 2018 Ford F150 key fob? Your key fob will need a CR2032 battery. It will have a release switch at the back. Slide out the metal key and unscrew the back cover. Locate the battery. Replace it with the positive (+) side facing up. Test it to make sure that it works.

To replace the battery, you’ll need to disassemble your key fob. It may be easier said than done, but you’ll be surprised how many options you have. For starters, you can buy a key fob that has a built-in charging unit, and you can replace the battery yourself for around $50. The quality and usage of your key fob will determine the price of the battery. It’s recommended that you replace your key fob battery every four years, or as soon as the signal quality is too weak to operate your vehicle.

If you’re wondering what kind of battery goes into your Ford F-150 key fob, the battery is usually between 1998 and 2011 and has a non-word side up and word side down. To open it, turn off the engine and then unscrew the bolt holding the black negative battery cable. Afterwards, the battery is separated into two halves, and you can replace it yourself.

READ ALSO:  What Gas Does Ford F150 Take?

How Do I Program My 2018 F150 Key Fob?

To program your key fob, you need to turn the ignition to OFF and then cycle through eight times from RUN to OFF. You must also cycle through the door lock cycle to confirm that the key fob is programmed. After that, the keyless entry will work properly. Follow these steps to program your new key fob. Once complete, your key fob will be ready to use.

Once you’ve made the decision to purchase the new remote key fob, you need to program the new one to work with your Ford. This is easy to do if you have two original key fobs. Then, you need to program the key fob in your car using the Ford touchscreen interface. Then, under the MyKey menu, you can adjust the settings to make them work the way you want.

To program your Ford key fob, you need to provide the administrator’s code. This code is the one that unlocks the key pad if you forget it. If you don’t have the code, you can search online for the code in the manual or visit your nearest Ford dealership. After you have the code, you can program the car to accept it. Generally, the code is less than 10 digits and is mostly alpha-numeric.

How Long Does a Battery Last in a 2018 F150?

If you’re wondering how long a battery lasts in a Ford F150 key fob, it is important to replace it every three to five years. Battery lifespan is dependent on driving habits, climate, and other factors. It’s also important to check your battery’s voltage to ensure it is still functional. Batteries naturally carry 12 or 13 volts. However, high-performance batteries can carry higher voltages, making replacements necessary.

Depending on the model of your vehicle, key fob batteries may last anywhere from four to eight years. Fortunately, most key fobs use CR2025 or CR2032 three-volt batteries. Check the owners manual for your specific model and then find a replacement battery. These batteries are usually sold in electronics stores or dealerships. When installing a new battery in your key fob, make sure to install it according to the instructions.

Using the vehicle’s key fob is a convenient way to open your vehicle. You can also set the alarm when the vehicle is parked. The Ford F150 key fob is made of plastic and can sometimes be made into an alarm. However, it does have some special features that make it unique and useful for owners of any vehicle. If you’re wondering how long a battery lasts in a 2018 Ford F150 key fob, here are a few things to keep in mind:

READ ALSO:  What Type of Brake Fluid For Ford F150?

What Battery Does Ford Key Fob?

If you are having trouble with the functionality of your Ford Key Fob, you might wonder what battery it has. Your fob probably uses a CR 2032 battery. These batteries are relatively small and easy to replace. They are compatible with third and fourth generation models from 2002 to 2010.

To find out what battery your key fob uses, consult your vehicle’s owner’s manual. Some key fobs use a CR2025 battery. Those batteries are readily available at most battery retailers. Depending on the retailer, they are sold for as little as $2 per unit. A 25-pack of these batteries should last you for several years. But if you do get tired of the battery after a short time, replace it with a new one.

Alternatively, you can take apart your key fob to find the battery. If you have trouble opening your key fob, visit a local automotive store. They will be happy to help you find the correct battery. If you’re still having trouble, take your Ford to the dealership to get it fixed. The service department is ready to help you get your key fob working again! Make sure you bring your car with you to avoid a delay.

How Do You Reset the Key Fob on a Ford F150?

If you’re wondering how to reset the key fob on a new Ford F150, you’re not alone. There are a number of ways to do this. The following instructions will explain the process in the simplest terms. Before you attempt the process, make sure that you understand the key fob itself. Your key fob contains two keys, an unlocked and a locked one. These two keys use a CR 2032 battery.

First, turn the ignition to “On” and press the START/STOP button twice. You should then remove the second programmed key from the center console. Then, insert the new unprogrammed smart key into the backup key slot. After a few seconds, the factory code will appear on the instrument cluster screen. You may want to memorize this code. Once you have done this, insert the key fob back into the ignition.

Next, you should find the Smart Junction Box on your Ford F150. This is usually located on the driver’s side over the brake pedal. It might take a flashlight or some trim to find it. Once you find it, look for the sticker on the Smart Junction Box. This sticker will contain a 5 digit code plus a letter. This is your keyless door entry code.

How Do You Open a Key Fob to Change the Battery?

If the battery in your key fob dies, you can open it by removing the plastic cover with a flat screwdriver. You can also use a small coin to pop it off. This will reveal the battery. It is smooth and flat. The screwdriver can be used as a pry bar. Once you’ve removed the cover, you can replace the battery.

READ ALSO:  How to Turn Off Traction Control 2009 Ford F150?

Your key fob contains a computer that monitors the output voltage. If the battery is too low, the warning light will illuminate. To change the battery, you must remove the cover and install a new three-volt coin-type battery. First, open the key blade. Press the small button on the key fob. Push the flat tip tool in between the seam and release the internal clips. Next, remove the plastic cover.

The battery in your key fob is located in a slot on the key itself. If the battery in your key fob dies, you can easily replace it by unscrewing the key fob from the back of the car. The replacement will take a couple of minutes and cost around $10-15. The key fob has many functions, including starting the truck from 100 feet away. However, if the battery is not charged properly, these functions won’t work.

How Much is a Ford Key Fob?

The first step in replacing a Ford key fob is to program the new one. Depending on the model and make, you may be able to get a new fob for less than $150 online. If not, you may need to visit a Ford dealership to purchase one. In some cases, this may cost up to $200. If the fob was programmed before the vehicle was sold, the replacement will only cost about $20.

You can buy a replacement key fob for under $50 at a hardware store. If you are handy, you can also buy one from a battery specialist. Dealerships will usually replace a battery for free. You can also purchase a key fob from hardware stores or online. Make sure to read the manual or watch a video about replacing a key fob. If you cannot find the owner’s manual, you can look up videos online.

While a Ford key fob may be more convenient, it can also be a pain. In some cases, a key fob may be misplaced or stolen. In such cases, you may need to purchase another one for spare use. An automotive dealer in 2021 can provide you with a perfect key fob. The dealer can check the availability of a new fob and program it for your vehicle.

Learn More Here:

1.) Latest on Ford F150

2.) Ford F Series – Wikipedia

3.) Official Ford Support

4.) F150 History