Skip to Content

How Much is the Toll From NJ to NY For Trucks?

If you’re driving a large truck between New Jersey and New York, you may be wondering “How Much is the Toll From NJ to NY for trucks?” The answer is complicated, but it’s not impossible to find out! Using the TollGuru toll calculator, you can figure out how much you’ll need to pay based on the number of axles in your vehicle. You can use the calculator on any of the six bridges operated by the Port Authority of New York and New Jersey, the Lincoln tunnel, Whispool Rapids Bridge, and the Rid Van Winkle Bridge.

The cost of a toll for a truck varies depending on the number of axles, time of day, and mode of payment. Toll prices are listed in $US for a 5-axle truck. Passenger vehicles with only two axles pay a separate toll rate. This pricing structure is effective as of April 11, 2021. It’s worth noting that truck toll rates can change based on weather conditions.

Does the George Washington Bridge Allow Trucks?

Located in New Jersey, the George Washington Bridge spans the Hudson River between Fort Lee, New Jersey and the Washington Heights neighborhood of Manhattan. With 14 lanes and more than one million vehicles crossing its path each year, it has the highest vehicular capacity of any bridge in the world. That’s a lot of traffic, but it’s not just cars. Trucks, too. Almost 9 million trucks pass under the GWB each year.

The GWB is a popular route for trucks to cross New York City and northern New Jersey. However, the GWB is losing truck traffic. Oversize/heavy trucks can only cross on the upper levels of the bridge. While trucks are allowed on lower levels, they are not allowed on the lower level. In addition, trucks are not allowed on West End Avenue, a section of the bridge that was previously designated for passenger cars.

Some restrictions apply to trucks. In the past, trucks were not allowed to cross the lower level of the bridge. Currently, only passenger vehicles with an EZ-Pass tag could cross the bridge. The 179th Street Ramp was modified in December 2017. The temporary restrictions on width on the bridge will last until the third quarter of 2020. In the meantime, oversized and overweight trucks will be subject to a special permit.

READ ALSO:  How Much is the New Mustang Truck?

How Much is the Toll From NJ to NY 2022?

The Garden State Parkway is a toll road that runs across New Jersey. It connects many different towns and cities, and has 20 toll entrances and exits. It collects tolls around the clock. Those with trucks should budget about $5.50 for this road trip. The cost of a toll depends on the size of the vehicle and the length of time the vehicle will be on the road.

The hikes came at a time when gas prices have skyrocketed. In the spring of 2021, the national average price for a gallon of gasoline was less than $2.30. Today, it costs about $3.424 per gallon, with a slightly higher price in New Jersey. The toll hikes in 2020 are the first since 2012. While they drew widespread support from Democrats, many Republicans have voiced their disapproval of the Turnpike Authority plan.

In 2022, the toll charge for trucks will be determined by axle count, direction of travel, mode of payment, and more. Tolls for five-axle trucks are listed below. Passenger vehicles can find their toll rates by using a different table. The toll rates for 2-axle trucks are listed separately. Until April 11, 2022, all truck toll rates will remain the same.

Can You Get From NJ to NY Without Paying Tolls?

Getting from New Jersey to New York may not be difficult if you know where to look. The Garden State Parkway spans the entire state and connects numerous towns and cities. The Parkway features more than 20 points of entry and exit and collects tolls around the clock. Here’s how to avoid paying tolls:

First, consider how much tolls will cost you. Tolls can add up quickly, especially if you’re driving for a long time. In New York City, you may spend hundreds of dollars just getting to work and back. That’s not to mention the toll fees and the high gas prices. However, if you’re a frequent commuter, there are ways to avoid paying tolls altogether.

READ ALSO:  What Size Mattress Fits in a Semi Truck?

Another way to avoid paying tolls is to take public transportation. Rather than drive or take a taxi, consider taking a bus or train to NYC. New Jersey has a great public transportation system and there are several ways to get from NJ to NYC without paying tolls. Even better, many of the roads that connect NJ and NY are toll-free on the way back. Just be sure to plan your route carefully and avoid any tolls you’ll encounter.

Can Trucks Use Verrazano Bridge?

In 1986, the Verrazano-Narrows Bridge was placed under one-way tolling, and trucks were not allowed on the road in either direction. The toll booths were removed in 2014, but a partial restoration of two-way tolling is now underway. The WB plaza and lane-control signals are no longer operational. During the reconstruction of the median, the original bridge supports will be removed.

In the wake of the disaster, the MTA banned empty tractor trailers from using the Verrazzano Bridge. Singh’s trailer was unloaded when it crashed. No signage had warned him that the bridge was unsafe, and it took 30 minutes for fire crews to ensure the trailer didn’t contain any hazardous chemicals. Although the lane restrictions on the Verrazzano have been eased, the bridge remains underrated.

During severe weather conditions, semi trucks are prohibited from traveling on the Verrazzano-Narrows Bridge. Trucks may not exceed 13.5 feet in height and 80,000 pounds of weight, but they are allowed on the lower level. Additionally, the Whitestone bridge connects the Bronx and Queens. However, there are several restrictions on the use of the Whitestone bridge. If you’re planning to cross the Verrazzano-Narrows Bridge, be sure to consult the MTA first before planning your trip.

What Roads are Trucks Not Allowed on in NYC?

Commercial vehicles are not allowed on certain parts of New York’s roadways. While most roadways have a minimum height of 6’11”, a few segments of the parkways do not allow commercial vehicles. Those that do can often get stuck and result in serious accidents or traffic delays. Moreover, if you do get stuck on any roadway in the city, you could end up receiving a fine and points on your license. The NYC DOT encourages you not to rely on GPS devices. Instead, look for signs or a sign indicating whether or not a commercial vehicle can drive on it.

READ ALSO:  How Tow Truck Drivers Get Paid?

Some roads are not allowed for trucks, such as the Manhattan Bridge. Only 53-foot trailer trucks are allowed on these roads. The BQE to Manhattan Bridge ramp, along with the West Side Highway, are closed to trucks. On the Manhattan Bridge, vehicles must move east and follow the straight rule. The Queensboro and Williamsburg bridges are also closed to trucks. The GW Bridge is another example. Truck drivers are not allowed on these bridges.

Where Can I Park a Semi Truck in DC?

Where Can I park a semi truck in Washington, DC? is a common question for truckers. These drivers need a place to park their truck and rest. Finding a parking space can be difficult especially when there are so many other vehicles on the road. Lack of available parking spots for truckers can lead to safety concerns and hours-of-service violations. To avoid such issues, truckers should follow these tips when looking for parking in the city.

In the District of Columbia, trucks can only park in designated spots. Most large truck stops fill up quickly. However, smaller, mom-and-pop truck stops may have a few open spots during peak hours. Look for spots on smaller truck stops when traveling in areas near large cities. Be sure to always park your truck properly because backing out can be dangerous and will take a lot of time. Depending on where you park your truck, it could be difficult to find a space.

What is a 5 Axle Truck?

A five-axle truck is a semi-trailer combination with two or more trailer axles. These trucks are used to pull flatbeds, enclosed van trailers, or refrigerated trailers. A five-axle spread tandem combination allows the truck to pull heavier cargo, but also reduces the trailer length. Gross weight for this combination is typically 80,000 pounds on US interstate highways. Certain states may allow even higher gross weights.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks