If you’re building a house, you’ve probably heard about 57 stone. It is a type of gravel, ranging in size from about half an inch to one and a half inches. It is a natural substance, containing gravel, limestone, dolomite, sandstone, and granites. It is typically used as a base for walls. At two inches in depth, a dump truck load will cover approximately 90-100 square feet.
To find out how much a dump truck load of 57 stone costs, divide the cubic feet by 27. Then, multiply the number by four. The resulting number will be the cubic yards. Similarly, a large dump truck can haul more than two tons of gravel. Smaller ones can only haul between 6.5 and seven cubic yards of material. The cost of a dump truck load depends on the quality of the material.
Related Questions / Contents
How Many Tons of 57 Stone are in a Dump Truck?
How many tons of #57 stone are in a dump truck? You’ll need to figure out how much material you need to complete your project. It’s generally sold by the ton, and it weighs around 1.4 tons per cubic yard. Crushed stone and gravel products, such as #57 stone, have similar weights per cubic yard, so the amount you need will be similar as well.
In general, a full-size dump truck can hold anywhere from 10 to 16 cubic yards of materials. This means that it can carry approximately twelve cubic yards of stone, fifteen cubic yards of topsoil, and twenty-two cubic yards of dirt. Depending on the type of quarry and the depth of the rock, crushed stone has a variety of colors and can range from grey to tan. Its shape is roughly angular and ranges from 3/4 inch to one-third inch.
How Much is a Dump Load of Gravel?
#57 stone is gravel that is about one to one and a half inches in size, about the same size as a nickel or quarter. Its shape allows water to drain away from wet areas and has excellent drainage. It’s also a heavy material, making it an excellent base for driveways. Sometimes it’s called driveway gravel. Here’s how to figure out the cost of a dump truck load of #57 stone.
A dump truck load of a particular material is measured in tons. A ton is five cubic feet. Thus, a dump truck can haul about thirteen tons of landscaping materials. This is related to the gross vehicle weight rating of the truck, which is actually close to the actual load capacity. It’s important to know the gross vehicle weight rating before you purchase gravel. This is the heaviest material the truck can haul before sustaining damage.
Prices for gravel can vary greatly depending on the type of stone you need and the size. It ranges from $15 to $50 per ton, but is typically $30-$35 per cubic yard. Some suppliers offer discounts for bulk purchases of more than fifteen tons. If you’re looking for gravel, ask for a bag’s worth of information. Even if you’re only going to need five tons, you may need more than one or two cubic yards.
How Much is a Full Load of Stone?
How much is a dump truck load of 57 stone? The amount of stone required for a large driveway or retaining wall depends on its weight. Because crushed stone is sold by weight, a heavier load will cost more. To determine how much stone you need, you can use a crushed stone calculator online. Input the size of the area you plan to cover and how deep you want the stone to be. A ton of #57 stone will cover about 150 square feet.
A #57 stone is a type of gravel that is 1 to 1-1/2 inches in size. It is composed of several different types of rock. Although it is generally considered the cheapest material for construction projects, it does vary in price. Crushed stone in your local area may cost less than rock from another part of the country. Using local crushed stone is a great way to save money on #57 stone.
How Many Yards is 57 Stone in Tons?
How many tons is 57 stone? A cubic yard of #57 stone weighs 2,410 pounds. If you want to lay a driveway with #57 stone, you’ll need two truckloads of 2.98 tons. The material needs for a driveway that’s 10 feet wide by 40 feet long and two inches deep would be approximately 2.5 cubic yards. In a landscape design, this stone works well as a base layer, and it is also great for use in the underside of a storage shed.
The cubic yard is an Imperial unit of volume that defines the volume of a cube with sides measuring three feet and one yard. It is commonly used to measure building materials, including concrete. #57 stone is generally sold by the ton, and one cubic yard holds approximately 1.4 tons. Almost all crushed stone and gravel products have similar weights per cubic yard, and are sold by the ton.
How Much Stone Can a Dump Truck Hold?
There are many different types of dump trucks, ranging in size from a standard pickup to a larger tri axle truck. A standard sized dump truck can carry anywhere from six to twelve cubic yards of gravel or crushed stone. These trucks are most commonly used for small jobs. However, the maximum amount a dump truck can carry is often much higher than this. The following are some of the most common sizes of dump trucks.
Prices will depend on the type of gravel you need. Sharp gravel will cost more than smooth, polished gravel. Higher-quality gravel will also cost more per cubic yard. A typical price for gravel ranges from $15 to $180 per cubic yard. If you’re looking for a small, rounded stone to use on a driveway, pea gravel is a great choice. It comes in a range of gray, brown, and white.
How Much Does a Yard of 57 Stone Way?
Crushed stone is sold by the ton, and the heavier the ton, the higher the price. You can use an online calculator to figure out how much stone you need. To use the calculator, enter the area’s dimensions and depth and press “calculate.” You’ll see that one ton of #57 stone covers 150 square feet. You can also estimate the cost of stone by using the amount of stone in a cubic yard.
Despite its reputation as a relatively inexpensive material, #57 stone is not always the cheapest material. There are many factors that influence the price of #57 stone. For example, if you want a driveway with a stone accent, you’ll probably have to pay more than a yard of concrete, which can cost more than half a yard. The price of #57 stone will vary according to where it’s being used.
What is the Cheapest Gravel For a Driveway?
Crushed shells, pea gravel, and recycled asphalt are some of the least expensive options for a driveway. Crushed shells, for instance, cost around $0.60 per square foot. Crushed concrete, slate chips, and rock pebbles cost about $1.50 per square foot. Crushed concrete and crushed shells are best for the base layer of your driveway. However, the cheapest gravel for a driveway is pea gravel.
If you’re looking for a more traditional material, limestone may be the best choice for your driveway. Other types of gravel, such as granite and shale, are more suited to the interior of your home. While limestone is generally the most expensive, crushed shale can become a bluish gray color after a while. Marble chips add a touch of luxury and sparkle to the driveway. Crushed concrete mimics the appearance of gravel and is also cheaper than round rock. Crushed seashells lend a coastal feel, but may not be appropriate for driveways.
Another cheaper option is to layer a new driveway surface on top of the existing driveway. Although it may seem cheaper, this is a bad idea. Gravel driveways erode and the sub-base will drop over time, which can cause a number of problems for homeowners. Always consult with a contractor before installing a new driveway to avoid costly mistakes. While a new driveway is the cheapest option, it is not always the best option for your home.
Learn More Here:
3.) Best Trucks