Skip to Content

How Much is a 10 Yard Truck of Concrete?

Depending on the project, how much a full truckload will cost can range anywhere from $125 to $3,250. A full truckload consists of 10 cubic yards of concrete. However, it is common to order less than a truckload for less than $1020. If you are planning a larger construction project, you’ll need at least a ten yard truckload of concrete.

Most cement trucks deliver to one customer at a time. This is known as a “ready mix” delivery. The truck arrives with concrete mixed according to your specifications, and you can then begin work. Typically, ready-mixed concrete is ideal for building driveways, large slabs, sidewalks, and foundations. The driver will leave a 90-minute window to deliver the concrete.

Prices for concrete deliveries are typically quoted by the cubic yard. On average, the price per cubic yard is about $125, including delivery charges of up to $55 and fuel fees of up to $25. However, these prices can be higher if you’re pouring a driveway at a slower rate than normal. It’s important to note that most companies charge by the cubic yard, and less will cost you an extra $53 per cubic yard.

How Many Yards of Concrete is in a Truck Load?

How Many Yards of Concrete is in ONE TRUCK LOAD? A truck loaded with ready mix concrete weighs approximately 3600 pounds, or about 2136 kilograms per cubic meter. The weight of concrete depends on its density, which is a combination of air, water, and aggregates. One cubic yard contains 27 cubic feet. For a more accurate measurement, ask your concrete company how much they will need, and how much extra will they order.

When fully loaded, a concrete truck holds 10 cubic yards of concrete. This amount can cover anywhere from 270 to 810 square feet, depending on the depth of the slab. For comparison, a small truck holds five cubic yards of concrete. Therefore, it is important to understand how much concrete each type of truck can carry. Once you know the exact weight, you can make a better decision when choosing a truck for your project.

To make sure your concrete is delivered on time, discuss the lead time between deliveries. A full truck load can take a couple hours to pour, and two truck loads can deliver 10 yards of concrete. But a half truck load can be delivered in about an hour and will cost you $2400 or more. For most people, 20 yards of concrete is enough for two or three normal-sized homes.

READ ALSO:  How Do You Transport Skis in a Pickup Truck?

Is It Cheaper to Mix Your Own Concrete?

Doing DIY projects can be expensive. Even the cheapest types of concrete are available in multiple-bag varieties and often require the use of a mixer and other tools. A larger project can easily run into the hundreds of dollars per bag, and the supplemental cost of hiring a mixer can add up quickly. Instead, consider hiring a concrete supplier and paying a fixed price for the concrete you need.

While renting a cement mixer can be inexpensive, you’ll need to be very accurate when measuring. It’s better to buy concrete than to guesstimate the amount you’ll need. Besides, you’ll need to buy an extra bag of concrete for waste if you mix the concrete incorrectly. You’ll also need to invest in proper forms such as 2×4’s for sides and stakes at corners.

While mixing your own concrete can save you a lot of money, it’s not a fool’s errand. You’ll need good material and a good mixer to create a consistent mixture. Remember that iron in aggregate can rust your surface and make it unsightly. A concrete mixer can be expensive, so a small batch is probably the best option. If you don’t have a large budget, mixing your own concrete is a good option for smaller projects.

How Much Does a 10X10 Concrete Slab Cost?

A slab is not cheap. It takes time and coordination to prepare a large area for concrete. A slab built on an uneven surface can damage your home’s foundation. It may be tempting to save a few dollars on labor by doing the work yourself, but a few thousand dollars saved now isn’t worth the possibility of damaging the house in the future. When looking for a concrete contractor, make sure they offer a warranty on their work.

Some grading is included in the cost of a slab, but this is often more of leveling. Your contractor will assess the site to ensure it’s level and consult with a structural engineer to determine the appropriate slope for your slab. The price for a slab on grade is $4 to $8 per square foot. If you’d like a slab that’s slightly sloping, it will cost you an additional $4 to $8 per square foot.

READ ALSO:  How Much Does It Cost to Remodel a Food Truck?

How Do You Pour a 10X10 Concrete Slab?

One of the most important steps in the concrete pour is planning the job. Mark the perimeter of the slab by driving stakes at the corners. String a level line between the stakes to determine if the site is sloping. If so, remove soil. Then, cut long side form boards about 3 inches longer than the new slab and nail them to the corner stakes. Once all of the form boards are in place, the final step is to level the site with a grader.

To begin the concrete pour, you’ll need safety gear. You’ll need a face mask and protective eyewear, as well as sturdy footwear. You’ll also need to lay timbers around the perimeter of the slab to provide shuttering. You’ll also need a flat, dust-free surface to work on. And remember to wear gloves! Wet concrete is toxic. Wear protective gear and research the proper finishing methods.

How Thick Should a Concrete Slab Be?

Typical residential slabs are four to six inches thick. Larger slabs are at least five to six inches thick. The ground level should be cut to accommodate the slab thickness. If the slab will bear a great deal of weight, an additional two inches should be added. However, this thickness is generally not necessary for most residential projects. Several factors should be considered when determining the thickness of a concrete slab.

The thickness of a concrete slab depends on the climate in the area. Depending on the location, you may need to use a thicker slab if you plan on constructing a large structure. However, this can be costly. A thick slab can prevent cracks and erosion of the soil underneath it. For these reasons, it’s best to follow the guidelines of local building codes when determining the thickness of a concrete slab.

To calculate the thickness of a concrete slab, first determine how many floors you need. For residential construction, you can use the rule of thumb “10X12/24” to determine the thickness of the slab. If you’re designing a single-story house, your slab should be about five to six inches thick. This thickness is equal to one foot of span. If you’re planning a multi-level structure, consider using steel beams and columns to support the slab.

READ ALSO:  When Passing a Truck Drivers Should?

How Many 80Lb Bags of Concrete Make a Yard?

If you’re working on a construction project, you may be wondering how many 80Lb bags of concrete you’ll need. This amount varies depending on the size of the bag and the number of square feet the job requires. You may need to fill post holes or sonotube footings, or both. In either case, mixing your own concrete can save you money, and may be a better option than buying ready-mixed concrete.

One cubic yard of concrete will cover 12ft2 when spread one inch thick. Then, one cubic yard of concrete spread 1/2 inch thick will cover twenty-seven square feet, while three-quarter-inch thick bags will cover forty-seven square feet. Then, you can multiply this number by 27 to get the total coverage of your yard. If you’re working on a large, complex slab, you might need to use several pours to create the finished product.

To calculate how many 80Lb bags of concrete make a yard, enter the following three numbers: width, length, and height. The calculator will tell you how many forty-pound bags, sixty-pound bags, and eighty-pound bags of concrete will create a cubic yard. The square footage is important, because it will determine how many 80Lb bags of concrete you’ll need to cover a specific area.

How Far Away Can a Concrete Truck Pour?

A concrete truck’s wheels can only drive so far. The truck itself can’t go much further. Even if the driver gets off the truck and walks on the site, the wheels have to be kept at least a foot away from walls, trenches, and weak soil. However, concrete trucks equipped with pumps can reach hundreds of feet away. They can pour concrete directly into a pump or shoot the concrete into a higher location.

Concrete trucks usually have a capacity of 10 cubic yards, and their minimum delivery fee ranges from $1,169 to $1,444. This amount of concrete will pour a 20′ x 24′ concrete driveway. That’s 8.88 cubic yards. The minimum delivery amount is 10 cubic yards, and if you need less, you’ll pay an additional $53 per cubic yard. However, it’s not uncommon for a truck to be only a few miles away when it’s not able to deliver enough material.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks