Skip to Content

How Do I Measure My Truck Bed?

Before you buy a new bed liner or other accessories, it’s important to measure your truck bed first. The length of your truck bed will vary depending on the make and model of your truck. Many suppliers will round the measurements to the nearest couple of inches. Be sure to take several measurements, one for the rear bulkhead and one for the tailgate.

Getting the exact dimensions of your truck bed is crucial not only for the transport capacity of your cargo, but also for furnishing your truck with accessories. While following the manufacturer’s measurements is the easiest route to follow, it’s not always enough. For instance, you may want to buy a bedliner that is just a little bit larger than your truck’s base bed.

To measure your truck bed, you can either use a tape measure or use your smartphone’s calculator to get the measurements. To use a tape measure, start at the inside edge of the tailgate or bulkhead of the bed. Measure each side and multiply the width and length by 12.

How Can I Tell the Length of My Truck Bed by VIN?

If you are unsure of the length of your truck bed, check the VIN on the vehicle. Most manufacturers round up their bed measurements, so you might not be able to find the exact length listed on your vehicle. Fortunately, you can get a close estimate by measuring your truck’s bed. You can then choose the appropriate accessories to fit the bed.

To determine the length of your truck bed, you need to measure the distance between the inside wall of the bulkhead and the tailgate. This measurement may not be exact enough, however, because most manufacturers round measurements to the nearest half-foot. You can also try flattening the object to get a more accurate measurement.

The VIN number is your vehicle’s identification number. You can find this information on your vehicle by looking it up online or by calling your dealership’s parts department. The VIN can also be found on your vehicle’s dashboard. If you are unsure of the VIN, you can also ask the parts department to find out the length of the truck bed.

How are Chevy Truck Beds Measured?

To make sure that your truck bed will fit the cargo you need to carry, you need to accurately measure its length and width. You can do this with a measuring tape. Make sure that the tape is straight and not bent, and measure twice for accuracy. To measure the length of a truck bed, measure it from the inside of the wall to the top of the side walls.

READ ALSO:  What Size Truck Needed to Pull a Fifth Wheel?

The bed length can vary a bit, depending on the make and model. This is common, and manufacturers will usually round up the numbers. However, you should be able to get an accurate measurement within a few inches of the stated length. Regardless of the size of your truck, you should still use a measuring tape to properly measure the length of the truck bed.

Next, you need to determine how high the tailgate is. The height of the tailgate is measured from the bottom of the truck bed. You should take a tape measure that fits between the tailgate and the inside of the bulkhead. Make sure that it is straight and does not bend when you measure the tailgate. The height of the tailgate is usually given in feet, but you can also calculate cubic yardage by dividing the height by 27.

Does the VIN Tell You the Bed Size?

If you want to know the size of a truck’s bed, it’s easy to look up the VIN number on the vehicle. The VIN is usually found in the windshield or door jamb on the drivers side of a truck. You can also call the dealership’s parts department and ask them to tell you. There are several different truck bed sizes on the market today. You’ll probably find that a six-foot bed is the most common size for a pickup, but you can find an 8-foot bed on many vehicles, too.

Another way to find the bed size of a truck is to use a VIN decoder to look at the truck’s VDS index. The VDS index gives you valuable information about the truck’s body, engine, and more. Using this information, you can determine the make and model of your truck. It’s particularly helpful when you’re ordering a large truck, such as a pickup. A truck bed is typically six to seven feet long, measured from the front edge of the bed to the edge of the tailgate.

READ ALSO:  What License to Drive a Dump Truck?

The bed size of a truck varies depending on the model and the manufacturer. Short beds are about five feet long, while long beds are seven feet long. You should choose the right size for your vehicle when shopping for a truck. You may also be able to buy accessories that extend the bed length.

What Size Bed is on a 2021 Ram 1500 Crew Cab?

RAM offers two bed sizes for its Ram 1500 family, a standard bed and a short bed. The standard bed is 6′ 4″ long, 6′ 3″ wide, and 21.5 inches deep. It offers a total passenger volume of 132.4 cubic feet. The short bed, on the other hand, is smaller at only 5′ 7″ long.

The RAM 1500 is taller than most full-size trucks, with a height of 77.5 inches. This height makes it an excellent choice for people who need to haul a large amount of cargo. However, it can be difficult to maneuver the pickup in tight parking spaces and garages. Fortunately, there are different bed sizes for the RAM 1500, and they vary depending on the trim level.

A Crew Cab has a longer bed than a Regular Cab, and can accommodate larger cargo. It also has more interior passenger volume. If you’re planning on using the truck for work, the Crew Cab is your best option.

Do Tonneau Covers Fit All Trucks?

To get the best cover for your truck, you must first measure the bed. Use a measuring tape that is at least eight to ten feet long. Store the measurements in your phone’s notes app. Measure from the wall of the bed to the floor. Once you have the exact measurement of the bed, you can order a tonneau cover.

Roll-up covers can be either soft or hard, or a combination. The latter type allows you to have nearly full bed access and may also be removable. However, it requires removing the rail system that runs along the bed frame. This can be cumbersome, so most owners leave it installed.

If you need to store a lot of stuff in your truck, you should choose a durable tonneau cover. These covers have a protective coating to protect your cargo and will also improve the aerodynamics of your truck. They will also enhance the aesthetics of your pickup truck.

READ ALSO:  Is Becoming a Truck Driver Worth It?

How Do You Measure the Cubic Feet of a Truck Bed?

A truck bed’s cubic feet can be measured in two different ways. You can measure the length of the truck bed and then the height of the tailgate. Then, you can divide that number by two to get the cubic yardage of the truck bed. For example, if the truck bed measures 18 inches long and the tailgate is 18 inches tall, you would divide the two measurements by two to get the cubic yardage of the truck bed.

To measure the cubic feet of a truck bed, you can use a tape measure or a pencil to take a measurement. For best results, use a straight, level measuring tape. It is best to repeat the measurements if the first one is not accurate.

Depending on your truck’s make and model, the length of the bed varies, so it’s important to get an accurate measurement of the bed. This is important if you want to install accessories and increase cargo capacity. It is a good idea to take the measurements with a friend so you can be sure you’re getting the correct measurements. Make sure to include the walls and rails as well.

What is the Width of a Standard Truck Bed?

There are a few factors that determine how long a truck bed is. The length of a bed is one of the most important features if you plan to haul a lot of heavy materials. A standard truck bed is between six feet eight inches long, but this will vary between models. Full-sized trucks typically have a longer bed than standard trucks. Some even have short beds!

To find out the exact dimensions of your truck’s bed, you need to measure the inside edge of the sidewall at the bottom. Next, measure the inside edge of the opposite bulkhead. Finally, measure the distance between the inside wheel wells and the inside edge of the sidewall. Once you have this measurement, you can then purchase accessories for your truck.

Truck bed width is also important. You’ll need to make sure you measure the space between the rear-wheel and tailgate. Most truck accessory companies report the width and length to the nearest half-foot.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks