Skip to Content

How Do I Know What Size My Truck Bed Is?

First, it’s important to know the exact length and width of your truck bed. This way, you can determine if the bed is long enough or short enough to fit the toolbox you want. The length and width of your bed should be measured from the bulkhead to the forward edge of the wheel well.

You can use a tape measure to make a measurement. Place the tape measure across the bed’s top, bottom, and sides. Once you’ve done this, you can make an informed decision regarding which type of truck bed you want to purchase. Just remember, these measurements will not match the exterior dimensions of your truck, so you should double-check the measurements before making a purchase.

It’s vital to know the size of your truck bed before buying accessories for it. Whether you’re planning a weekend campout, buying a sectional for your truck, or hauling large items, the size of your bed will determine how much space you’ll have for whatever you want to haul. Also, certain accessories, such as bed rails, tool boxes, and covers, require specific sizing. If you don’t measure your bed accurately, you could end up buying a tonneau cover that is too long or too short.

How Do You Measure a Truck Bed For a Tent?

Before you start shopping for a truck bed tent, it’s important to know how much space your truck bed has. A standard truck bed is 56 inches long by 23 inches wide. This size is equivalent to approximately nine square feet. Note that the bed length and width will vary depending on your truck type, but this general rule still holds true.

First, find the make and model of your truck. You can then compare the length and width of your bed to the advertised length and width. Also, remember that if the truck bed is angled, this measurement can change slightly. In such a case, make sure that the measurement is the same as the nearest length of the bed.

READ ALSO:  What Channel is the Nascar Truck Race On?

The width of a truck bed is measured from the inner bulkhead to the tailgate, the part of the truck that opens at the back. Some people think that the inside bulkhead measurement is the same as the outside measurement, but this is not true. The inside and outside measurements vary greatly from truck manufacturer to truck manufacturer.

Can You Tell Bed Size by VIN?

When you’re shopping for a new truck, you may be interested in finding out the bed size. One of the easiest ways to determine this is by looking up the VIN of the vehicle. The VIN is the vehicle identification number and will tell you the bed length and width. A truck’s VIN is typically found at the bottom of the windshield or in the door jamb of the drivers side. You can also find this information on a vehicle’s dashboard.

If you don’t have access to a truck’s VIN, you can check the truck’s label to determine its bed size. The label will list the Gross Vehicle Weight Rating, or GVR, which is the maximum weight a truck can safely haul. It will also include the truck’s total weight. This number can also be found in the vehicle’s user manual.

You can also use a web vin decoder to determine the bed size of a truck. Many dealerships offer this service and will print a build sheet for you within seconds. You can also try decoding a VIN by yourself if you know how to do it. Many of these services charge a fee, but some of them will provide the build sheet.

Is It Better to Tow with a Long Bed Or Short Bed?

There are pros and cons to both types of truck when it comes to towing. While long-bed trucks tend to be more stable and have greater payload capacity, short-bed trucks can still pack a punch when it comes to hauling large loads. The main advantage of the long-bed truck is the ease of maneuverability, but you should also keep in mind that a long-bed truck may be a bit more expensive than a short bed truck.

Long-bed trucks are better for towing a trailer because of their longer wheelbase. It can tow larger trailers like travel trailers and fifth-wheel trailers. Moreover, long-bed trucks have wider wheels, which offer better balance on roads with uneven surfaces.

READ ALSO:  How Much Do Cargo Truck Drivers Make?

The short-bed truck is smaller and requires a special fifth wheel for towing. It also has less turning radius, which makes it easier to maneuver.

Do Long Bed Trucks Ride Better?

One of the most common questions about trucks is “Do Long Bed Trucks Ride Better?” The answer is somewhat complicated, but it can be summed up in one sentence: long beds have better handling than short beds. These trucks are better for hauling long items, and are generally more stable. They are also better for towing long items and fifth wheels.

Long bed trucks are usually more expensive than short bed trucks. But they offer more cargo space, so you can haul more camping and sporting equipment. Additionally, they can tow massive fifth wheels. These factors will definitely add to the cost, but the benefits far outweigh the cost. So, if you’re looking for a truck that can haul everything, a long bed truck is a great choice.

Short bed pickup trucks have their own advantages. They are cheaper than their long bed counterparts, and some even have optional features. However, some short bed pickups have durability issues. This is because the rear bed is separate from the cab, which makes it flex more than other pickups. In general, however, short bed pickups perform better in off-road situations. Furthermore, short bed pickups are much less likely to have a high center of gravity.

What Truck Has a 6 Foot Bed?

There are a number of methods for measuring the length of the bed of a truck. To begin, determine the truck’s length by measuring the space between the tailgate and the interior bulkhead. Then, compare this measurement to the length of the bed. This measurement should be within a few inches of the actual length.

The exact measurements can be complex depending on the brand of truck you have and the bed size. However, most sellers allow you to input your truck specs so that you can buy the right size liner. You should measure the length and width of your truck’s bed in inches, and then multiply that figure by two.

You can find this information on most pickup trucks by looking up the truck’s dimensions. Often, the dimensions are reported in feet, but the actual measurements may vary. Often, manufacturers will report a few inches more than they actually report.

READ ALSO:  Can I Leave My Semi Truck at Walmart?

What is Fleetside on a Truck?

Fleetside truck beds are the most common type of truck bed. They are the standard on Dodge, GM, and Ford trucks. These beds feature flat sides and wheel arches inside the bed, which make them easier to manufacture and optimize hauling capacity. Short-box truck beds are also a common option, but are not quite as popular as fleetside truck beds.

Fleetside trucks are designed for carrying large objects. They are convenient and spacious. They also have a flat bottom that makes them easy to access. Fleetside trucks often have a step to lower their bed. One popular example of a fleetside bed is the Ford F-series truck. Ford built fleetside trucks for its F-series trucks from 1967 until 1972.

Stepside trucks are less common than fleetside trucks, and modern truck manufacturers are moving away from offering stepside trucks. Despite this, some manufacturers are making faux stepside trucks to pay homage to the stepside aesthetic. Typically, the length of a truck’s bed depends on a number of factors, including the brand and model. Small fleetside trucks have bed lengths of about four feet, while larger trucks have beds as much as eight feet long. The length of a truck bed is usually measured from the edge of the sidewall to the inner edge of the wheel wells.

Learn More Here:

1.) History of Trucks

2.) Trucks – Wikipedia

3.) Best Trucks