Truck toolboxes come in a variety of shapes and sizes, and not all of them fit all trucks. You should determine the model of your truck and the bed lining before purchasing a tool box. Additionally, make sure the truck toolbox complements the interior trim and paint color of your truck. Lastly, choose a toolbox that is designed to fit the tools and supplies you plan to haul.
Most truck tool boxes are made of hard plastic or welded metal. Although this construction is sturdy and durable, it is not impenetrable and will rust over time. In addition, it can be very frustrating to try to dig through them and find what you need. To avoid these issues, consider a truck tool box with a locking latch system.
Some tool boxes are installed behind the cab. Others are installed directly on the truck bed floor. These types of boxes don’t go higher than the bed rails and can cause blind spots for the driver. They also take up space in the truck bed, so they can hinder cargo capacity.
What are the Tool Boxes on Trucks Called?
Tool boxes on trucks come in different styles. There are gull-wing, saddle, and cross-box models. The cross-box is the most popular type and is the easiest to install. This type of toolbox is mounted on the truck’s bed rails and can be accessed from both sides. Some models feature a dual compartment design and other styles are connected directly to the crossover tool box.
Another common style is the chest tool box, which sits on the bed floor. This style allows the driver to access all of the tools in the box without having to go out of the bed to grab the tools. This style does, however, limit the space in the truck’s bed.
In addition to providing convenient storage for tools, a truck toolbox also protects them from theft and vandalism. Choosing a toolbox that has these features is essential. Pick a toolbox made of heavy duty aluminum or stainless steel for maximum protection. Also, ensure that you test the lock, latch, and force required to open and close the toolbox.
Do I Need a Toolbox For My Truck?
Choosing the right toolbox for your truck is an important step if you want to maximize cargo space and make the most of your truck’s features. Some models have mounting hardware pre-installed, but other models will require you to drill holes to secure them. To make sure that the tool box stays in place, measure the location of the box and use a durable metal bit and a powerful drill to drill the holes.
Toolboxes are not only convenient for hauling tools, they also provide additional security for your vehicle. Vehicle break-ins are common, so having a lockable toolbox will make your tools more secure. Locking the toolbox can also reduce insurance claims. Whether you’re a construction worker, a farmer, or an outdoor enthusiast, a toolbox is a necessity for your truck.
A toolbox sits underneath the tonneau cover, leaving more space underneath. Some toolboxes are equipped with extra clamps to support heavy loads. For example, a lockable aluminum box that measures 26 by 20 by 19 inches and weighs 21 pounds is a good choice for storing heavy tools. A 74-inch-wide black toolbox with contractor-grade latches and a closed cell foam gasket is also available.
How Do You Secure a Tool Box to a Truck Bed?
To secure a toolbox, the first step is to remove the lid of the box and insert a j-bolt through the holes in the tool box. Next, insert a rubber plug in the threaded part of the j-bolt. Finally, tighten the nuts. Don’t overtighten them, though, or they could damage the bed rails.
When you’re securing a truck tool box, you need to align the holes in the tool chest with the holes in the truck bed. This way, the toolbox will be centered in the truck. You can also drill new holes in the toolbox to line up with the railings on the bed of your truck.
Next, you need to secure the tool box to the truck bed. Depending on the type of toolbox, you can use screws or bolts to attach the box. If the toolbox is made of metal, you will need metal drill bits. Plastic toolboxes usually come with pre-drilled holes and bolts that can be screwed in.
How Do You Measure a Truck Box?
The first step in measuring a truck box is to determine how deep it is. A truck box that is too deep will not fit in a truck. It can also interfere with the truck bed liner and wheel well. To determine how deep a truck box is, measure the distance between the point “X” on the truck bed rail and the bottom of the box.
To measure a truck bed, you will need a 10-foot tape measure, a pen or pencil, and paper. For more advanced measurements, you may use a pocket calculator or smartphone. Start by standing at the inside wall of the truck bed and extending the tape measure straight across it to the opposite bulkhead.
Next, measure the width and length of the bed. This can be tricky. The length of the bed depends on the manufacturer of the truck, so it is essential to measure the length of the bed properly. A common mistake is to round up the measurements when ordering accessories.
Are All Truck Tool Boxes the Same Size?
There are different sizes of truck tool boxes. You can choose a standard box or a larger one that is specifically made for your vehicle. Most standard tool boxes will extend below the floor, but an oversized tool chest can exceed the height of the bed. In order to make sure your truck’s tool box will fit in the bed, check the clearance.
Side-rail tool boxes are usually more sturdy because they have feet against the bed of the truck. Swing boxes, on the other hand, attach to the truck’s bed via hinges. The hinges help prevent wind-driven rain from leaking into the box. Tonneau cover-compatible boxes will have hardware suspended from the bed rail.
Truck tool boxes come in A, B, and C sizes. A size is the largest and fits most mid-sized trucks, while B and C sizes are the smallest.
How Do You Waterproof a Truck Tool Box?
If you’re looking to buy a new tool box for your truck, one of the best things you can do to keep the contents dry is to waterproof it. There are several types of waterproof coatings for truck tool boxes, and the best one will depend on what you’re trying to protect. For example, steel is the most durable and costly option, but it is also susceptible to rust and corrosion. Other options include aluminum, which is lightweight and affordable, and naturally resistant to corrosion. These materials are often coated with a textured surface to make them non-slip, but they’re still not as durable as steel.
A truck tool box is a valuable piece of equipment to keep in the truck, and it is essential that you keep it well protected and organized. It can help you to protect your tools from the elements and give you more space in your cab. It also protects your tools from moisture and corrosion. Waterproof tool boxes should be able to withstand any weather conditions you might encounter while traveling.
How Do You Make a Truck Tool Box?
There are a few basic steps to building a truck tool box. First, remove any rubber plugs from the existing holes in your truck’s cargo bay. Once this is done, line up the bottom of the toolbox with the holes. Use four to six bolts to secure the toolbox.
Next, choose your tool box. Do you want a toolbox that spans the bed of your truck, or one that sits under your vehicle? Whichever option you choose, you’ll need to consider size and style. Some tool boxes have gull-wing lids, which open with a hinge. These make it easy to find the right tool without opening the entire toolbox.
A cross box is a good option for your truck’s bed. It allows for easy access on either side while securing the box in a safe manner. A hi-side tool box is another option. It allows for maximum access, but does not have any pre-installed shelves, so you’ll need to stack your tools. You can easily build shelves into the side of your truck, or you can use a shelf system that you make yourself.
Learn More Here:
3.) Best Trucks